Advantech PCI-1285V
Value DSP-Based 8-Axis Stepping and Servo Motor Control Universal PCI Card
- Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
- Pulse output up to 5 Mpps
- Supports linear and circular interpolation
- Hardware emergency input
- Supports E-Gear
- Supports programmable acceleration/deceleration rate
- Memory buffer (10K points) for trajectory planning which is designed in DSP(Auto-blending is not supported)
- Position compares triggering up to 100 KHz, and memory buffer is up to 100 K points in DSP
- Position latch
- Programmable interrupt and watchdog timer
- RDY/LTC-dedicated input channels & SVON/CMP/CAM-DO/ERC-dedicated output channels are switchable for general input and output purposes
The PCI-1285V is a 8-axis universal PCI (supporting both 3.3V and 5V signal Slot) stepping
/pulse-type servo motor control card designed for applications which need to control interp
olation, synchronization amon mulitple axes and continuous contouring. The PCI-1285V utilizes
the high-performance DSP and FPGA to calculate the motion trajectories, synchronization timing
control for multiple axes and input/output handling offer functionality suich as linear interpolation
2/3 axis circular interpolation. Compare trigger, T/S curve acceleration/deceleration rate and so on.
In addition Advantech supplies a Common Motion API library, graphical utility and user-friendly examples
to decrease programming load helping users complete configuration and diagnosis easily.
/pulse-type servo motor control card designed for applications which need to control interp
olation, synchronization amon mulitple axes and continuous contouring. The PCI-1285V utilizes
the high-performance DSP and FPGA to calculate the motion trajectories, synchronization timing
control for multiple axes and input/output handling offer functionality suich as linear interpolation
2/3 axis circular interpolation. Compare trigger, T/S curve acceleration/deceleration rate and so on.
In addition Advantech supplies a Common Motion API library, graphical utility and user-friendly examples
to decrease programming load helping users complete configuration and diagnosis easily.
Specifications
Pulse Type Motion Control
Position Compare I/O CMP
Encoder Interface
General
Ordering Information
Accessories
Pulse Type Motion Control
Motor Driver Support | Pulse-type servo/stepping | |||
Number of Axes | 4/8 | |||
Interpolation | Linear, 2/3-axis circular interpolation | |||
Max. Output Speed | 5 Mbps | |||
Step Count Range | +-2, 147, 483, 646 | |||
Pulse Output Type | Pulse/direction (1-pulse, 1-direction type), CW/CCW (2-pulse type) | |||
Position Counters | Range of command and actual position | |||
Velocity Profiles | T-Curve, S-Curve | |||
Local I/O |
Machine Interfaces: | LMT+, LMT-, ORG |
Servo Driver Interfaces | ALM, INP |
Encoder Interface
Input Type | Quadrature (A/B Phase) or up/down |
Counts per Enc. Cycle | x1, x2, x3 |
Input Range | 0 ~ 10V |
Isolation Protection | 2,500V DC |
Max. Input Frequency | 10 MMHz under 4xAB mode |
General
Bus Type | Universal PCI V2.2 |
Connectors | 1 x 100-pin SCSI female connector |
Dimensions (L x H) | 175 x 100 mm(6.9" x 3.9") |
Power Consumption | Typical: 5V @ 850mA Max: 5V @1A |
Humidity | 5 ~ 95%RH, non-condensing (IEC 60068-2-3) |
Operating Temperature | 0 ~ 60°C (32 ~ 140°F) |
Storage Temperature | -20 ~ 85°C (-4 ~ 185°F) |
Ordering Information
PCI-1245V-AE | Value 4-axis Stepping/Pulse-type Servo Motor COntrol Universal PCI Card |
PCI-1285V-AE | Value 8-axis Stepping/Pulse-type Servo Motor COntrol Universal PCI Card |
Accessories
ADAM-3956-AE | 100-pin DIN-rail SCSI 4-axis Motion Wiring Board |
ADAM-3955-AE | 50-pin DIN-rail SCSI 2-axis Motion Wiring Board |
ADAM-3952-AE | 50-pin DIN-rail SCSI and Box Header Board |
ADAM-39100-AE | 100-pin DIN-rail SCSI Wiring Board |
PCL-101100M-1E/2E/3E | 100-pin SCSI Cable, 1m/2m/3m |
PCL-10251-1E/2E/3E | 100-pin SCSI to Two 50-pin SCSI Cable, 1m/2m/3m |
PCL-10153PA5-2E | 50-pin Cable to Panasonic A4/A5 Servo, 2m |
PCL-10153YS5-2E | 50-pin Cable to Yaskawa Sigma V/7 Servo,2m |
PCL-10153MJ3-2E | 50-pin Cable to Mitsubishi J3/J4 Servo, 2m |
PCL-10153DA2-2E | 50-pin Cablte to Delta A2 Servo, 2m |
Kunden, die diesen Artikel gesehen haben, sahen auch