Advantech PCI-1274
Basic Motion Control Card with Multi Latch/Compare Trigger Function
- All Images
- Encoder input is 4 MHz for 4xAB mode, 1 MHz for CW/CCW mode
- Pulse output up to 1 Mpps and the output type can be switched to differential or single-end by jumper setting
- Support velocity motion
- Supports speed override
- Supports T/S-curve and programmable acceleration/deceleration rate
- Support 16 Home modes
- Support programmable interrupt
- Latch and Compare max. frequency up to 1kHz
- PCI-1274-12AE support 12-ch latch and 12-ch Compare function
- PCI-1274-16AE support 16-ch latch and 16-ch Compare function
The PCI-1274 is a basic motion control PCI card with multi-latch/compare trigger function.
PCI-1274 utilized the high-performance FPGA to provide Point-to-Point, Latch and Compare
Trigger with a SoftMotion algorithm inside to perform precise position control. PCI-1274 also
has internal FIFO to enable high speed position to compare and trigger pulse output. User can
link compare trigger outputs to latch inputs one by one, or link all compare trigger outputs
to single channel of latch input only. Integrating a camera and senors realizes AOI applications
such as linear screw, and IC and vision inspection sorting machine. In addition, all Advantech
motion controllers use the "Common Motion API" architecture which is a unified user programming
interface and graphical utility. This architecture saves application maintenance and upgrades.
Programmers can benefit from integrating any Advantech SotMotion controller without changing
large amounts of the application code. User-friendly examples decrease prgramming workload
helping users complete configuration and diagnosis easily.
PCI-1274 utilized the high-performance FPGA to provide Point-to-Point, Latch and Compare
Trigger with a SoftMotion algorithm inside to perform precise position control. PCI-1274 also
has internal FIFO to enable high speed position to compare and trigger pulse output. User can
link compare trigger outputs to latch inputs one by one, or link all compare trigger outputs
to single channel of latch input only. Integrating a camera and senors realizes AOI applications
such as linear screw, and IC and vision inspection sorting machine. In addition, all Advantech
motion controllers use the "Common Motion API" architecture which is a unified user programming
interface and graphical utility. This architecture saves application maintenance and upgrades.
Programmers can benefit from integrating any Advantech SotMotion controller without changing
large amounts of the application code. User-friendly examples decrease prgramming workload
helping users complete configuration and diagnosis easily.
Specifications
Pulse Type Motion Control
Encoder Interface
General
Ordering Information
Accessories
Pulse Type Motion Control
Motor Driver Support | Pulse-type servo/stepping |
Number of Axes | 4 (PCI-11274-12AE) 1 (PCI-1274-16AE) |
Interpolation | 2-axis linear interpolation Only for PCI-1274-12AE |
Max. Output Speed | 1 Mpps |
Step Count Range | +-2, 147, 483, 646 |
Pulse Output Type | Pulse/direction (1-pulse, 1-direction type), CW/CCW (2-pulse type) or single-ended +5V output |
Position Counters | Range of command and actual position |
Velocity Profiles | T-Curve, S-Curve |
Local I/O | |
Machine Interfaces: | LMT+, LMT-, ORG |
Servo Driver Interfaces | ALM, INP |
Encoder Interface
Input Type | Quadrature (A/B phase) or up/down |
Counts per Enc. Cycle | x1, x2, x4 (A/B phase only) |
Input Range | 5-10V |
Isolation Protection | 2,500V DC |
Max. Input Frequency | 4MHz under 4xAB mode |
General
Bus Type | Universal PCI V2.2 |
Connectors | 1 x 100-pin SGSI female connector |
Dimensions (L x H) | 175 x 100 mm (6.9" x 3.9") |
Power Consumption | Typical: 5V @ 0.6A Max: 5V @1A |
Humidity | 5 ~ 95% RH, non-condensing (IEC 60068-2-3) |
Operating Temperature | 0 ~ 60°C (32 ~ 140°F) |
Storage Temperature | -20 ~ 85°C (-4 ~ 185°F) |
Ordering Information
PCI-1274-12AE | Basic 4-axis Motion Control Card with 12 Latch/ 12 Compare Trigger Function |
PCI-1274-16AE | Basic 1-axis Motion COntrol Card with 16 Latch/ 16 Compare Trigger Function |
Accessories
ADAM-3956-AE | 100-pin DIN-rail SCSI 4-axis Motion Wiring Board |
ADAM-39100-AE | 100-pin DIN-rail SCSI Wiring Board |
PCL-101100M-1E/2E/3E | 100-pin SCSI Cable, 1m/2m/3m |
PCL-10153PA5-2E | 50-pin Cable from ADAM-3955/ADAM-3956to Panasonic A4 and A5 Servo, 2m |
PCL-10153YS5-2E | 50-pin Cable from ADAM-3955/ADAM-3956 to Yaskawa Sigma V Servo, 2m |
PCL-10153MJ3-2E | 50-pin Cable from ADAM-3955/ADAM-3956 to Mitsuboshi J3 Servo, 2m |
PCL-10153DA2-2E | 50-pin Cable from ADAM-3955/ADAM-3956 to Delta A2 Servo,2m |
Kunden, die diesen Artikel gesehen haben, sahen auch