Advantech WISE-4210-AP
LPWAN Wireless to Ethernet AP
- Proprietary LPWAN using sub-1GHz wireless frequency
- Longer communication range than 2.4GHz
- Better penetration through concrete and steel than 2.4GHz
- Less interference than 2.4GHz spectrum
- Support up to 64 sensor node clients
- MQTT and RESTful API IoT Protocol Support
- Azure IoT Hub Support
LPWAN, created for machine-to-machine (M2M) and Internet of things (IoT) networks, is not a single technology, but a variety of low-power, wide area network technologies. Compare with traditional mobile network, LPWAN is known as lower cost with higher power efficiency. WISE-4210 series is the proprietary LPWAN which provides better connection compare with traditional 2.4G WiFi, WISE-4210 series is helpful of eliminating network interference.
Additionally, WISE-4210 utilize a LPWAN(low-power, wide-area networks) wireless interface, which has a kilometer-long communication distance and battery power. The features of LPWAN make WISE modules ideal solutions for energy and environment monitoring.
Reduced Interference and Extended Communication Range
Compared with Wi-Fi, Bluetooth, Zigbee, or other 2.4GHz wireless interfae, a sub-GHz interface can reduce interference at sites. Moreover, Sub-GHz is a type of LPWAN designed for long-range communications. Under the same power consumption, sub-GHz offers a longer communication range with low data rate than other 2.4 GHz. technologies.
Powered by a 3.6V AA Lithium Battery
The low power consumption of sub-GHz enables the sensor node to be powered by a battery. With a 3.6V AA Lithium battery, the sensor node can maintain communication at a distance of 5 km for up to 5 years, thereby eliminating the need to recharge or change batteries.
Star Topology
Star topology, also known as star network, is the most common network setup. In star topology, every node connects to a central network device which means WISE-4210-S200 series nodes acts as clients should be connected with WISE-4210-AP. In this configuration, user can organize their own network with 64 nodes paired. Data on a star network pass through WISE-4210-AP before continuing to its destination. WISE-4210-AP with a LAN cable manages and controls most of all functions of the network.
MQTT and RESTful API IoT Protocol Support
IoT Wireless sensor nodes are designed for not only automation applications but also IoT applications that may use MQTT or RESTful web API IoT protocols for cloud integrations.
Azure IoT Hub Support
To provide a complete IoT sensing solution, the WISE-4210 series goes beyond being a wireless communication interface for sensors—it also provides cloud connectivity for additional user applications. With support for HTTPS and integrated APIs for Azure IoT Hub, the WISE-4210 series can automatically push data to the cloud without requiring an IoT gateway.
WISE-4210 wireless sensor node and AP series utilize proprietary LPWAN (Low-Power Wide-Area Network) wireless communication technology. Comparing with traditional 2.4G Wi-Fi, Sub-1GHz LPWAN can provide better connection and eliminate network interference. A WISE-4210-AP can organize a LPWAN network with 64 WISE-4210-S200 series nodes paired by star topology. Moreover, WISE-4210-AP supports MQTT and RESTful API IoT protocol for cloud integration as well as pre-integrating Azure IoT Hub for automatically pushing data to the cloud without requiring any gateway.
Common Specification
WISE-4210
Frequency Band | NA915: 923MHz (920.60~924.60), BW: 400kHz EU868: 868MHz (865.00~869.00), BW: 400kHz UN433: 433MHz (433.05~434.55), BW: 300kHz |
Antenna Gain | 902~928MHz:1.33 dBi 863~870MHz:2.19 dBi |
Data Rate | 625bps, 50kbps |
Outdoor Range | 625bps: 5 km with line of sight 50kbps: 2 km with line of sight |
Topology | Star |
Network Capacity | 64 clients |
General | |
Power Input | AP: 10 ~ 50 VDC Sensor Node: 3 x AA, 3.6V Lithium Battery or 10 ~ 50 VDC |
Battery Life | 625bps: 5 years with 10 minute update rate @ 25°C 50kbps: 5 years with 1 minute update rate @ 25°C |
Configuration Interface | AP: LAN port Sensor Node: Micro-B USB |
LED Indicator | Status, Error, Tx, Rx, Battery/Signal Level |
Mounting | DIN 35 rail, wall, pole and stack |
Dimension (W x H x D) | 70 x 102 x 38 mm |
Certification | CE, FCC, IC, NCC, TELEC |
Environment | |
Operating Temperature | -25 ~ 70°C |
Operating Humidity | 5 ~ 95% RH |
Storage Temperature | -40 ~ 85°C |
Storage Humidity | 0 ~ 95% RH |
WISE-4210-AP (Access Point)
Data Rate | 625 bps, 2.5k bps, 5k bps, 50k bps, |
Ethernet | RJ-45 (for configuration and data query) |
RS-485 | Data+, Data- (for query node data) |
Messaging Protocol | Modbus/TCP, Modbus/RTU, REST, MQTT |
Application Protocol | HTTP, HTTPS, SNTP, DHCP |
Transport Protocol | TCP, UDP |
Supports RESTful Web API in JSON format | |
Supports Web Server in HTML5 |
Ordering Information
WISE-4210 Access Point | |
WISE-4210-APNA | LPWAN Wireless to Ethernet AP – NA915/EU868 |
WISE-4210-APUA | LPWAN Wireless to Ethernet AP – UN433 |
WISE-4210 Node | |
WISE-4210-NA | Proprietary LPWAN SUB-G Wireless I/O Module – NA915/EU868 |
WISE-4210-UA | Proprietary LPWAN SUB-G Wireless I/O Module – UN433 |
WISE-4210-S231-NA | LPWAN IoT WSN Temp & RH Sensor- NA902/EU868 |
WISE-4210-S231-UA | LPWAN IoT WSN Temp & RH Sensor - UN433 |
WISE-S200 I/O Module | |
WISE-S214-A | 4AI/4DI |
WISE-S250-A | 6DI, 2DO & 1RS-485 |
WISE-S251-A | 6DI & 1RS-485 |
* Power saving is not for downlink mode. | |
Accessories | |
1760002647-01 | Bat.Cylindrical 3.6V/2500mAh AA Li/SOCl2 |
1750008836-01* | 863-870MHz Dipole Antenna for WISE-4210 |
1750008837-01* | 902-928MHz Dipole Antenna for WISE-4210 |
* AS923/EU868 version of WISE-4210 needs to order antenna separately | |
Kunden, die diesen Artikel gesehen haben, sahen auch