IOTWORKSHOP SerialPort Pro-EP20
Embedded Linux Networking Server
- MIPS MCU with 16MB Flash and 32MB SRAM
- Use Linux Operation System
- Support Serial To 10/100M Ethernet Conversion,
- Serial Speed Upto 460800 bps
- Support 10/100M Ethernet Auto-Negotiation
- Support Easy Configuration through a WebInterface
- Support Security Protocol such as SSL/AES/DES3
- Support Web OTA Wireless Upgrade
- Single +3.3V Power Supply
- Size: 50 x 23x 11 mm(L x W x H)
- CE Certificated
The SerialPort Pro-EP20 unit is a complete solution for adding network connectivity to any device with a serial port connection. Packaged into an RJ45 connector, this powerful device boasts a 10/100BASE-T Ethernet connection, a reliable and proven operating system stored in flash memory, an embedded web server, a full TCP/IP protocol stack and standards-based (AES) encryption.
The SerialPort Pro-EP20 uses highly integrated hardware and software platform, optimised for real world applications such as industrial control, smart grid and remote control. By simply adding the SerialPort Pro-EP20 unit to a product design, device manufacturers can reduce their design cycle and time-to-market with minimal impact and risk.
The SerialPort Pro-EP20 integrates all Serial-to-Ethernet functionality inside a low-profile (50mm x 23mm x 11mm) RJ45 package that can be easily be mounted on to a PCB without any changes to the original design.
The SerialPort Pro-EP20 also includes an embedded web server used to remotely configure, monitor, or troubleshoot the attached device.
The SerialPort Pro-EP20 meets EMC Class B security level and surpasses the certification test for all countries.
Development kit is available
The SerialPort Pro-EP20 uses highly integrated hardware and software platform, optimised for real world applications such as industrial control, smart grid and remote control. By simply adding the SerialPort Pro-EP20 unit to a product design, device manufacturers can reduce their design cycle and time-to-market with minimal impact and risk.
The SerialPort Pro-EP20 integrates all Serial-to-Ethernet functionality inside a low-profile (50mm x 23mm x 11mm) RJ45 package that can be easily be mounted on to a PCB without any changes to the original design.
The SerialPort Pro-EP20 also includes an embedded web server used to remotely configure, monitor, or troubleshoot the attached device.
The SerialPort Pro-EP20 meets EMC Class B security level and surpasses the certification test for all countries.
Development kit is available
System Information | |
Processor/Frequency | MIPS/320MHz |
Flash/SDRAM | 16MB/32MB |
Operating System | Linux |
Ethernet | |
Port Number | 1 RJ45 with LED |
Interface Standard | 10/100 Base-T Auto-Negotiation |
Protection | 2KV Isolation |
Network Transformer | Integrated |
Network Protocol | IP,TCP,UDP,DHCP,DNS,HTTP Server/Client,ARP, BOOTP, AutoIP, ICMP,Web socket, Telnet, FTP,TFTP, uPNP, NTP, SNMP,Modbus TCP |
Security Protocol | SSL v3(2048)、 AES 128Bit、3DES、 SHA-1、MD5、Base-64、RSA、ECC |
IPV6 Support | Support |
Serial | |
Port Number | 1 + 1 debug |
Interface Standard | 3.3V TTL: 2 wire(TX,RX) |
Data Bits | 7,8 |
Stop Bit | 1,2 |
Check Bit | None,Even,Odd,Space,Mark |
Baud Rate | TTL: 600 bps~460800bps |
Flow Control | No Flow control Hardware RTS/CTS、DSR/DTR Software Xon/ Xoffflow control |
Software | |
Web Pages | Http Web Configuration Customization of HTTP Web Pages |
Log | Remote Realtime Log |
Configuration | Web CLI XML import Telnet IOTManager PC Software |
PC Config Tools | IOTManager PC Software |
SDK For Dev. | Support |
Basic Parameter | |
Size | 50x 23x 11mm |
Operating Temp. | -45 ~ 70°C |
Storage Temp. | -45 ~ 105°C, 5 ~ 95% RH(no condensation) |
Input Voltage | 3.3V |
Working Current | ~200mA |
Power | <700mW |
Certificate | CE, FCC, RoHS |
Kunden, die diesen Artikel gesehen haben, sahen auch