ADDER ADDERLink XDIP
Fanless, small form factor, HDMI, USB and Audio Extender, Switch or Matrix
- Uses IP technology over standard CATx network cable
- Point-to-point, switching, sharing or small matrix operation
- Local USB and video feed through ports
- PoE models are powered by PoE or an optional external PSU
- USB2.0 (low & full speed) for keyboard, mouse, tablet and touch screen
- Analog audio with headphone support
- Standard IP network
- SUN compatible
- PC compatible
- Mac compatible
- DVI interface
- HDMI interface
- USB interface
- RJ45 interface
- Audio connectivity
- HD-KVM Full 1080p
- 24 bit colour
Digital video extender, switch or matrix with USB and audio over IP via 1GbE network
The AdderLink XDIP is a compact, easy to install, fanless matrix solution that runs on a standard IP network and enables users to extend and manage their computers with ultra-low latency, HD video and stereo audio. The XDIP is scalable, from simple extension to small matrix. It is very well suited to small and medium sized installations.
Configurable units
- The XDIP user and computer units are the same and assigned a role at set up. They can transmit/receive up to 1920x1200 video, stereo analog audio and USB2.0 over a single twisted pair network cable.
High quality video, real time control
- XDIP implements low latency, high quality, 60Hz video compression to deliver an “at the computer” user experience over a standard Gigabit LAN.
CATx cable for connection
- Video, USB2.0 and audio all pass along a single minimum spec of CAT5e cable allowing use of existing infrastructure cables in the building and an immediate ROI. Distance is linked to the IP standard of 100m with a 40% overhead for safety. Longer distances are achieved by routing through your IP infrastructure.
Feed through and local computer support
- Video and USB feed through ports are available. These enable a local console at the source computer. A local computer is also supported at the user station.
One solution, many uses
- XDIP nodes can be configured as a simple extender, distributed KVM switch or KVM sharer or any combination up to 8 computers and 8 users (each user does not necessarily need to be connected to the same 8 computers).
EDID management
- The extender has intelligent EDID management to allow the true characteristics of the monitor to be passed back to the computer or alternatively, a fixed EDID can be specified.
Plug and Play
- There is no need for drivers or software to be installed. A simple wizard takes you through setup at the start of life of the product.
CD-quality analog audio
- CD-quality stereo audio (16-bit sampling at 48kHz) is passed between the local and remote units. Headphones are also supported (up to 32 Ohms impedance).
Industries
- Ideal for Audio Visual industry
Ideal for Banking industry
Ideal for Broadcast industry
Ideal for Command & Control industry
Ideal for Data Centre industry
Ideal for Government/Federal industry
Hardware compatibility
- All computers with HDMI, USB and analogue audio. Can be interfaced to VGA, DVI and DisplayPort with appropriate adaptors
Video Resolution
- The system supports resolutions to a maximum of 1920 x 1200 @ 60Hz
USB 2.0
- Supports USB2.0 HID devices (keyboard, mouse, tablet and touch)
Software compatibility
- All known operating systems. No drivers required
Computer connections
- HDMI, Audio 3.5mm, USB type B, 8p8c Ethernet port
Console connections
- HDMI, Ethernet, 3 x USB type A, Audio 3.5mm
Power connections
- POE 802.3af via Ethernet port or 3 Pin Locking DC jack (Optional: 100-240VAC 50/60Hz, 0.7A, input to power adapter, 12VDC 18W output from power adapter)
Physical design
- Compact case, robust metal construction. 169mm/6.65” (w), 31mm/1.22” (h), 120mm/4.8” (d), 0.6kg/1.3lbs.
Operating temperature
- 0 to 40ºC / 32 to 104ºF
Approvals
- CE, FCC
ORDERING INFORMATION
XDIP-POE: | Single node POE powered or by optional 12V PSU |
XDIP-PSU: | Single node with 12V PSU, no POE |
XDIP-RED: | Single node with PSU cable for connection to RED-PSU |
XDIP-IEC: | Single POE node including external 12V PSU |
XDIP/P-XX: | Two nodes in a single box for point to point extenders |
XX = Mains Lead Country Code:
UK | = United Kingdom |
EURO | = Europe |
ADDITIONAL ACCESSORIES
RMK8: | 19” rack mount kit - 2 units/1U slot |
RMK10: | Wall/desk mount kit |
WHAT’S IN THE BOX
- 1 x XDIP-POE
- 1 x 2 meter HDMI cable
- 1 x 2 meter USB A to B cable
- 1 x 2 meter 3.5mm jack audio cable
- 1 x quick start guide
Optional:
- PSU-IEC-12VDC-1.5A 18W PSU
- USC48 - 2 Meter power lead for RED-PSU
Kunden, die diesen Artikel gesehen haben, sahen auch