Multi-Tech MultiConnect AEW
Analog-to-Ethernet/Wireless Converter (MT200A2EW Series)
- 3G HSPA+ cellular radio
- Outbound and inbound calling
- Certified in North America, European Union, and Australia/New Zealand (Pending)
- Configurable WAN (Cellular or Ethernet)
- Set-up wizard
- Serial port configuration
- LEDs for visual monitoring of power, signal strength, and phone line status · No RS-232 port for use with external modem
- Supports packet data and PPP pass-through modes
- RJ-11 port provides dial tone and DTMF detection
- Supports analog modem connections from 300 baud to 33.6K bps with error correction and data compression
- Open VPN with Open SSL Encryption for secure connections
- Plastic chassis for indoor environments
The MultiConnect® AEW analog-to-Ethernet/wireless converter is a convenient turnkey solution that allows legacy equipment with built-in analog modems to connect to the cellular packet data network. By emulating the traditional dial-up PSTN network and using integrated or external cellular modems, the affordable MultiConnect AEW converter gives new life to devices currently using traditional analog dial-up communications.
KEY BENEFITS
Applications
The MultiConnect AEW converter is targeted at applications that have an integrated analog modem as part of the solution, but need to utilize the cellular network for connectivity to their host application. Some examples include:
KEY BENEFITS
- Extends the life of legacy dial-up devices by connecting them to cellular or Ethernet internet networks
- Saves time and money on post purchase industry-specific certifications
- Analog-to-Ethernet/wireless migration
- Converts phone number to IP address
- Connects legacy dial-up devices to cellular or wired Internet network
Applications
The MultiConnect AEW converter is targeted at applications that have an integrated analog modem as part of the solution, but need to utilize the cellular network for connectivity to their host application. Some examples include:
- Automated teller machines (ATMs)
- Credit card/POS terminals
- Home healthcare monitors
- Kiosks
- Security systems
- Industrial automation/utilities
SPECIFICATIONS
Model
- MT200A2EW-H5
Performance
- HSPA+
Frequency Band (MHz)
- Penta band 850/900/1700/1900/2100 MHz
Packet Data*
- HSDPA data service of up to 21.0 Mbps
HSUPA data service of up to 5.76 Mbps
Circuit Switched Data
- Up to 14.4 Kbps, non-transparent
Power Requirements
- Voltage
- 9V to 32V DC @ 400mA
Connectors
- Rf Antenna Connector
- 50 ohm SMA (female connector)
IP Ethernet
- WAN: RJ-45, 10/100 Base T
SIM Connector
- Standard 1.8 and 3V SIM receptacle
Dial Connector
- RJ11
Command Connector
- DE9 (female connector)
Power
- 2.5mm miniature (screw-on)
Physical Description
- Physical Dimensions (L x W x H)
- 2.89” x 4.75” x 1.58” (73.4 x 120.6 x 40.1 millimeters)
Physical Weight
- 0.325 lbs (0.147 Kg)
Chassis Type
- Plastic
Environmental
- Operating Temperature
- -22°to 167° F (-30° to 75° C)
Storage Temperature
- -40°to 185° F (-40° to 85° C)
Relative Humidity
- Relative humidity 20% to 90% noncondensing
Certifications
- Regulatory
- FCC Class B (US), R&TTE (EU Economic Area), IC (Canada),ACMA/RCM (AU/NZ), IFT (Mexico)
Safety
- UL60950-1, cUL60950-1, IEC60950-1, AS/NZS60950-1
Network
- PTCRB, AT&T
ORDERING INFORMATION
- MT200A2EW-H5
- 3G Analog-to-Ethernet/Wireless Converter
MT200A2EW-H5-WW
- HSPA+ Analog-to-Ethernet/Wireless Converter with Accessory Kit
Accessory Kit include power supply, antenna and cables
Kunden, die diesen Artikel gesehen haben, sahen auch