Advantech EKI-1362-MB
2-port RS-232/422/485 to 802.11b/g/n WLAN Modbus Gateway
- Link any serial device to an IEEE 802.11b/g/n network
- Support 802.11n MIMO 2T2R
- Support 802.11n MIMO 2T2R
- WLAN transmision rate up to 300 Mbps
- Supports secure access with WEP, WPA/WPA2-Personal, WPA/WPA2-Enterprise
- Provides COM port redirection, TCP, UDP, and pair connection modes
- Supports up to 921.6 kbps, and any baud rate setting
- Provides Web-based configuration and Windows utility
- Allows a max. of 5 hosts to access one serial port
- Supports 32-bit/64-bit Windows 2000/XP/Vista/7, Windows Server 2003/2008, Windows CE 5.0, and Linux
- Allows a max. of 4 hosts to be accessed as TCP client mode
EKI-1361 and EKI-1362 are wireless serial device servers that bring RS-232/422/485 to wireless LAN or LAN. They allow nearly any device with serial ports to connect and share an WLAN network. EKI-1361 and EKI-1362 provide a quick, simple and cost-effective way to bring the advantages of remote management and data accessibility to thousands of devices that cannot connect to a network.
With EKI-1361 and EKI-1362, your existing serial devices can be used with the most popular operating systems on the market. There is no need to write special drivers for specific operating systems. Moreover, you can make serial devices communicate with other devices peer-to-peer, without any intermediate host PCs and software programming. That saves a lot of cost and effort. In addition, you can actively request data or issue commands from the RS-232/422/485 side or wireless LAN side. This data can be sent bilaterally. Thus, the EKI-1361 and EKI-1362 are especially suitable for remote monitoring environments such as security systems, factory automaton, SCADA, transportation and more.
With EKI-1361 and EKI-1362, your existing serial devices can be used with the most popular operating systems on the market. There is no need to write special drivers for specific operating systems. Moreover, you can make serial devices communicate with other devices peer-to-peer, without any intermediate host PCs and software programming. That saves a lot of cost and effort. In addition, you can actively request data or issue commands from the RS-232/422/485 side or wireless LAN side. This data can be sent bilaterally. Thus, the EKI-1361 and EKI-1362 are especially suitable for remote monitoring environments such as security systems, factory automaton, SCADA, transportation and more.
Environment
- Operating Humidity
5 ~ 95% RH
Operating Temperature
-30 ~ 65°C (-22 ~ 149°F)
Storage Temperature
-40 ~ 80°C (-4 ~ 176°F)
Ethernet
- Interface
10/100/1000 Mbps
Ports
1
Serial Communication
- Ports
2
Type
RS-232/422/485, software selectable
Baud Rate
50 bps ~ 921.6 kbps, any baud rate setting
Data Bits
5, 6, 7, 8
Parity
None, Odd, Even, Space, Mark
Port Connector
DB9 male
Serial Signals
RS-232: TxD, RxD, CTS, RTS, DTR, DSR, DCD, RI, GND, RS-422: TxD+, TxD-, RxD+, RxD-, GND, RS-485: Data+, Data-, GND
Stop Bits
1, 1.5, 2
Software
- Operating Mode
Modbus RTU Master/Slave, Modbus ASCII Master/Slave
Configuration
Windows utility, Telnet console, Web Browser
Driver Support
32-bit/64-bit Windows 2000/XP/Vista/7, Windows Server 2003/2008, Windows CE 5.0, and Linux
Protocols
ICMP, TCP/IP, UDP, DHCP Client, Telnet, DNS, SNMP, HTTP, SMTP, SNTP, ARP
Utility Software
Advantech Serial Device Server Configuration Utility
Ethernet Communications
- Antenna Connector
Reverse SMA
Compatibility
IEEE 802.11b/g/n
Free Space Range
Open space 100 m
Network Mode
Infrastructure, Ad-hoc
No. of Antenna
2 (support 2T2R)
Wireless Security
WEP, WPA/WPA2-Personal, WPA/WPA2-Enterprise
General
- LED Indicators
System: Power, System Status, WLAN: Quality, Link/Active, LAN: Link/Active, Serial: Tx, Rx
Reboot Trigger
Built-in WDT (watchdog timer)
Mechanics
- Dimensions (W x H x D)
28.5 x 120 x 85.3 mm (1.12" x 4.72" x 3.36")
Enclosure
Plastic and metal shell with solid mounting kits
Mounting
DIN-rail, Wall
Weight
0.5 Kg
Power Requirements
- Power Connector
Terminal block
Power Consumption
9W
Power Input
12 ~ 48 VDC, redundant dual inputs
Regulatory Approvals
- EMC
CE, FCC Part 15 Subpart B (Class B)
Kunden, die diesen Artikel gesehen haben, sahen auch