MOXA VPort 461A
Superior video performance, 1-channel H.264/MJPEG industrial video encoders
- Bis zu 3 Video-Streams gleichzeitig für H.264 und MJPEG
- Bis zu Full-D1-Auflösung (720 x 480) bei 90 FPS für 3 Video-Streams mit älteren analogen Videobildern
- Video-Latenzzeiten unter 200 ms
- 2 Ethernet-Ports für Kaskadierung und Ethernet-Port-Redundanz
- Unterstützung der Moxa-DynaStream™-Funktion zur Optimierung der Netzwerkeffizienz
- Unterstützung der ONVIF-Standardisierung zur Gewährleistung der Interoperabilität
- Geräteeigene Speicherung über SD-Karte möglich
- Industrielle Ausführung mit -40 bis 75°C Betriebstemperaturbereich
Der industriegeeignete 1-Kanal-Videoencoder VPort 461A mit H.264-Komprimierung bietet die beste Videoqualität auf dem Markt, allerdings bei geringeren Bandbreitenanforderungen als andere Videokomprimierungsstandards. Der VPort 461A erfüllt aber nicht nur verschiedene Video-Stream-Anforderungen, er bietet auch bis zu 3 H.264- und/oder MJPEG-komprimierte Videostreams gleichzeitig. Video Streams können zu unterschiedlichen Zwecken (z.B. Betrachten, Aufzeichnen oder Analysieren von Videodaten) genutzt werden. Durch die industrietaugliche Auslegung, wozu neben einem Betriebstemperaturbereich von -40 °C bis 75 °C und der Dichtheit nach IP30 auch die entsprechenden Zertifizierungen gehören, ist der VPort 461A eine ausgezeichnete Wahl für den Einsatz in rauen Umgebungen.
Der VPort 461A ist mit der innovativen DynaStream™-Technik von Moxa ausgestattet, mit der sich bei überlastetem Netzwerk der Bandbreitenverbrauch Ihrer Videoübertragungen durch automatische Reduzierung der Framerate verringern lässt. DynaStream™ kann die Video-Framerate bei Notfällen aber auch erhöhen und gibt dem Netzwerkadministrator so die alleinige Kontrolle über die Nutzung der Bandbreite.
Video
Audio
Network
Serial Port
Local Storage
GPIO
LED Indicators
Power Requirements
Physical Characteristics
Alarms
PTZ (Pan/Tilt/Zoom)
Security
Environmental Limits
Standards and Certifications
MTBF (mean time between failures)
Minimum Viewing System Requirements
Software Development
- Video Compression
- DynaStream™ support for changing the video frame rate automatically
- Adjustable image size and quality
- Timestamp and text overlay
- Maximum of 10 simultaneous unicast connections, 50 multicast clients
- CBR Pro™ support for accurate streaming bit rate control
- Image manipulation: 180° rotation
- Image tuning: control brightness, contrast, saturation
H.264 (MPEG4 part 10), MJPEG
Video Inputs
1 (BNC connector)
Video Output
via Ethernet
Video Streams
3, H.264 or MJPEG video streams
NTSC/PAL
Auto-sensing or manual
Video Viewing
Audio
- Audio Inputs
1 Line-in or mic-in with 3.5 mm phone jack
Audio Outputs
1 Line-out with 3.5 mm phone jack
Audio Format
Mono, PCM (G.711)
Network
- Protocols
IPv4/v6, UDP, HTTP, SMTP, FTP, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS (ToS), SNMP V3, DDNS, Modbus/TCP, 802.1X, SSH/HTTPS
Ethernet
2 10/100BaseT(X) Ethernet ports, RJ45 connector
Serial Port
- PTZ Ports
1 RS-232 or RS-422/485 port, terminal block connector, 115.2 kbps
COM Ports
1 RS-232 or 485 port, DB9 male connector, 115.2 kbps
Console Port
1 RS-232 port, RJ45 connector
Local Storage
- SD Socket
Standard SD socket, V2.0 (SDHC)
GPIO
- Digital Inputs
2, max. 8 mAHigh: +13 to +30 V; Low: -30 to +3 V
Relay Outputs
2, max. 24 VDC @ 1 A
LED Indicators
- STAT
Indicates if system is booted up properly or not
PWR1
Power 1
PWR2
Power 2
FAULT
Can be configured to correspond to system alarm, power failure, or disconnected network
VIDEO
Video input signal
PTZ
Indicates if PTZ or COM port data has been transmitted
SD
Indicates if SD card was mounted successfully
Power Requirements
- Input Voltage
12 to 32 VDC, or 18 to 30 VAC
Input Current
0.85 A @ 12 VDC; 0.3 A @ 32 VDC; 0.85 A @ 18 VAC; 0.56 A @ 30 VAC
Physical Characteristics
- Housing
Metal, IP30 protection
Dimensions
46 x 134 x 105 mm (1.81 x 5.31 x 4.13 in)
Weight
710 g (1.57 lb), including DIN-rail mounting kit
Installation
DIN-rail mounting (standard), wall mounting (optional)
Alarms
- Intelligent Video
Camera tampering
Video Motion Detection
Includes sensitivity tuning
Scheduling
Daily repeat timing schedule
Imaging
JPEG snapshots for pre/trigger/post alarm images
Custom Alarms
HTTP event servers and CGI events for setting customized alarm actions
Email/FTP Messaging
Automatic transfer of stored images via email or FTP with event-triggered actions
Pre-alarm Buffer
50 MB for JPEG snapshot images
PTZ (Pan/Tilt/Zoom)
- PTZ Camera Control
Via PTZ port or COM port
PTZ Control Functions
Pan, tilt, zoom, focus, moving speed, preset position (max. 128 positions)
PTZ Function Updates
Driver upload supported
Supported Device Protocols
Pelco D, Pelco P, Custom Camera
Security
- Password
User level password protection
Filtering
By IP address
Authentication
802.1X
Encryption
HTTPS, SSH
Environmental Limits
- Operating Temperature
Standard Models: -25 to 60°C (-13 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Vibration
IEC 60068-2-6, 2 to 13.2 Hz: 2 mm (peak-peak); 13.2 to 100 Hz: 0.7g; 1.50 hrs/axis
IEC 60068-2-6, 3 to 9 Hz: 7 mm (peak-peak); 9 to 150 Hz: 1.0g; 1.86 hrs/axis
Shock
IEC 60068-2-27, 20g/11ms
Altitude
2000 m
Ingress Protection
IEC 60529, IP30
Standards and Certifications
- Safety
UL 60950-1
EMC
EN 55022/24
EMI
CISPR 22, FCC Part 15B Class A
EMS
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8
IEC 61000-4-11
Transportation
NEMA TS2
MTBF (mean time between failures)
- Time
647,088 hrs
Standard
Telcordia SR332
Minimum Viewing System Requirements
- CPU
Pentium 4, 2.4 GHz or above
Memory
512 MB memory or above
OS
Windows XP/2000 with SP4 or above, Windows Vista, Windows 7
Browser
Internet Explorer 9.x or above
Multimedia
DirectX 9.0c or above
Software Development
- VPort SDK PLUS
Includes CGI commands, ActiveX Control, and API library for customized applications or system integration for third-party developers (the latest version of SDK is available for download from Moxa’s website).
Standard
ONVIF, Profile S
Ordering Information | |
Available Models | |
VPort 461A | 1-channel H.264/MJPEG industrial video encoder with 2 10/100BaseT(X) ports, -25 to 60°C operating temperature |
VPort 461A-T | 1-channel H.264/MJPEG industrial video encoder with 2 10/100BaseT(X) ports, -40 to 75°C operating temperature |
Optional Accessories (can be purchased separately)
| |
MDR-40-24 | 40W/1.7A DIN-Rail 24 VDC power supply with universal 85 to 264 VAC or 120-370 VDC input , -20 to 70°C operating temperature |
MDR-60-24 | 60W/2.5A DIN-Rail 24 VDC power supply with universal 85 to 264 VAC or 120-370 VDC input, -20 to 70°C operating temperature |
| |
SoftNVR-IA | 64-channel IP video surveillance software designed for industrial automation systems |
| |
DR-4524/75-24/120-24 | 45/75/120 W DIN-Rail 24 VDC power supplies |
| |
WK-46 | Wall Mounting Kit |
RK-4U | 4U-high 19" rack mounting kit |
Kunden, die diesen Artikel gesehen haben, sahen auch