HW group Poseidon2 3266: Remote sensor monitoring ...

Poseidon2 3266 is a basic device for remote reading (monitoring) of sensors over the network. It measures temperature, voltage, and states of dry contacts (digital inputs) and other external sensors. It sends e-mail alerts to values out of a specified range, or connects to an environment monitoring system. Supports M2M protocols – SNMP (SNMPv3), Modbus/TCP, XML, and the Sensdesk.com online portal.

Poseidon2 3266 monitors temperature and other sensors over a network in order to create a remote environment monitoring solution. Up to 8 sensors and 4 digital inputs (dry contacts) can be connected. Poseidon2 is connected to the LAN, reads measurements, and stores the measurements in its internal memory (data logger). The device is accessible via WEB and can send e-mails (or text messages).

Sensors and detectors
We supply humidity and temperature sensors in indoor or outdoor designs, light intensity sensors, DC or AC current and voltage converters. Other sensors include smoke detectors, power failure detectors, water flood detection, and more.

When a value is out of a specified range, Poseidon2 sends an e-mail, a SNMP Trap, or a text message (SMS). No software is necessary to send text messages over the GSM network. All HW group devices can send text messages (SMS) through a single central gateway, the HWg-SMS-GW. Just a single SIM card can serve all your devices.

Poseidon2 3266 can be connected to various third-party applications or cloud services using various protocols (SNMP, Modbus/TCP, XML, HWg-Push).

Typical applications

• Poseidon2 sends an e-mail if a temperature is too high or a door is open (a dry contact connected to a digital input is closed). It can also monitor power supply status, smoke detectors, and the environment.
• Poseidon2 3266 is suitable as a remote monitoring system for servers and technology rooms. Measure remotely with Pt-100 and other temperature and humidity sensors.
• A frequent application is a remote environment monitoring system. It is easy to connect smoke detectors, water leak detectors, PIR motion sensors, etc. They are powered from the Poseidon2 3266 unit.

Usage examples

• Remote monitoring in IT environments
  Measures temperature and humidity remotely over the network, includes a data logger. Connects to any SNMP system.
  
  
• Temperature monitoring at several places
  Several Poseidon2 units can be linked to a single account at the SensDesk.com online portal. All readings are accessible anywhere using a web browser or a mobile app for Android and Apple.
  
  
• Cooler and freezer monitoring
  Monitor your technology or your food or pharmaceuticals storage. We recommend PDMS as the temperature monitoring software.
  
  
• UPS monitoring
  Monitor the states and voltages of uninterruptible power supplies, monitor diesel generators remotely. The unit sends an alarm in case of power failure.
  
  
• Surveillance systems
  Sensor readings and detector states can be fed to IP camera systems of various brands. External detectors (door contacts, PIR, smoke detectors etc.) can be easily connected to the digital inputs.
  
  
• A/C monitoring:
  A/C failure, power supply failure, temperature too high, or a leak of the coolant.
  
  
• Industrial applications
  Remote monitoring of dry contacts, 4-20mA probes or Pt-100 and Pt-1000 temperature probes. Data logger stores the values in the internal memory.

Remote monitoring of the environment in a room (temperature, humidity, smoke detector)

• Remote environment monitoring in a technology room
• Temperature and humidity measurement, door contact, smoke detector
• Smoke detector is powered directly from the power-out output of Poseidon2 3266
• Sends an e-mail or text message (SMS) alert whenever a value is exceeded or the door opened
• SMS can be sent using the HWg-SMS-GW unit or the HWg-Trigger utility for Windows
• Values are logged, the log can be displayed and processed e.g. in the HWg-PDMS utility for Windows
• Connection to a NMS (SNMP monitoring) or SCADA (Modbus/TCP) system

Remote temperature monitoring in coolers and freezers

• Flat-cable temperature probes are placed in the deep-freezers and coolers. The installation is simple, the cable leads by the door seal.
• The door contact alerts to improperly closed door
• Temperature in the cooler is logged in the internal memory of the Poseidon2 unit e.g. every 5 minutes
• E-mail or text message (SMS) alert is sent whenever a value is exceeded or the door is opened for longer than 3 minutes
• Sensors can be daisy-chained
• Temperature can be also measured with a calibrated Pt-100 or Pt-1000 probe

Monitoring of industrial 4-20mA, 0-10V, Pt-100 or Pt-1000 sensors

• A converter for two Pt-100 or Pt-1000 temperature probes can be connected to the Poseidon2 monitoring unit. The converter supports 2-wire, 3-wire and 4-wire connection of resistive temperature probes.
• Industrial sensors with the 4-20mA interface can be connected to RJ11 using a converter. The external sensor is electrically isolated.
• The external 4-20mA probe is powered from the measuring loop. The white converter box is powered from 12VDC (PowerOut output). The converter includes an electrically-isolated current supply for the external 4-20mA probe, providing up to 24V.
• The 0-60V sensor can be used to measure a voltage of 0-10V or to monitor 12/24/48V supply.
• Other converters can be connected to RJ11 as sensors: 0-30V AC, 0-20mA DC, 0-80A DC and more..

Specifications

• Digital Inputs: 4
• Sensors
  • 1-Wire / 1-Wire UNI (2x 60m) : 8
• SMS-GW client : yes
• Modbus/TCP : yes
• Logger : 250,000 records
• SNMP: yes
• E-mail alarms (periodical) : yes
• HWg-Push : yes
• Dimensions : 100 x 94 x 25 mm
• Supply : 9-30 V
• Temperature/humidity : -30 to 85°C , 20-80% R.H.

Ordering Information and Accessoires

Poseidon2 3266 Tset	Poseidon2 3266 evaluation set with temperature sensor. | Contains Poseidon2 3266, power adaptor, temperature sensor 3m, door contact, CD & manual.
Poseidon2 3266 THset	Poseidon2 3266 quick start set with a combined temperature/humidity sensor. Contains the Poseidon2 3266 unit, a power adapter, an indoor temperature and humidity sensor (3m cable), door contact, CD and a manual.
Poseidon2 3266	Poseidon2 3266 unit only. Remote sensor monitoring over LAN. 4x DI , 2xRJ11 – max 8 sensors (1-Wire UNI). WEB, XML, SNMP, Modbus/TCP.
Mount plate E – 1U	Rack (cabinet) mount plate, 1U montage for HWg-Ares, Poseidon2 3266/68 and other products.
Mount plate D	Wall mount plate for HWg-Ares, Poseidon2 3266/68 and other products.
DIN Rail box set	DIN rail mounting set.
HWg-SMS-GW2	Central SMS Gateway - start set GSM SMS gateway for sending text messages from other HW group devices over the LAN. Includes an internal GSM modem, an external antenna with 3m cable, a power adapter and a CD.
Expander 4xDI 1W-UNI	4 additional digital inputs connected as a 1-Wire UNI sensor.
PowerEgg	External unit to detect and control 230 V mains voltage.
Converter 2xPt100 1W-UNI	Converter to connect two PT100 probes.
30A Current probe 1W-UNI	Current probe, 0–30A AC. Line wire runs through the measuring coil (can be opened).