AKCP AC Voltage Sensor (ACVxx)
AC Voltage Sensor ( ACV00)
- up to 250V
- with an ALARM / NORMAL indication
- easy installation
The AC Voltage Sensor is used to indicate the presence or absence of line voltage. This is useful, for example to tell when the UPS is running on battery power.
The AC Voltage Sensor indicates an ALARM/NORMAL condition in software and also via an LED mounted on the sensor. Voltage detectors can detect the presence or the absence of line voltage. It is designed for use worldwide. There is an SNMP interface for getting the alarm/normal status. SNMP traps are sent when critical conditions occur.
SNMP polling via ?get? is available to retrieve existing status and configuration parameters. The Web browser interface is also available to display the status and configuration parameters.
When an alarm condition is activated the description and location of the fault can be sent via email, page or traps.
Technical Specifications
- Measurement
Type Normal or Alarm
Sensor Type
Open/Closed contact input switch
Voltage Range
50~250 VAC
Measurement
Rate Multiple readings every second
Indication
LED for Voltage presence
Operating Temperature
-20 °C~60 °C
4 °F~140 °F
Interface
- Communications Cable
RJ-45 jack to sensor using UTP Cat 5 wire
Communications Cable Max. length
The AC Voltage Sensor can be extended from the RJ-45 Intelligent Sensor ports
on the base units up to 1000 feet, or 300 meters using standard CAT5/6 LAN cable
Power Source
Powered by the controller unit. No additional power needed
Full autosense including disconnect alarm
Power Consumption
Typical 11 mWatt, 2.20mA
Dimensions
115 x 80 x 40 mm
Sensor count
1
Ordering Information
Product Model | Order Number | Description |
---|---|---|
AC Voltage Sensor | ||
ACV00 | 949008 | 5ft cable AC Voltage Sensor |
ACV15 | 15ft cable AC Voltage Sensor | |
ACV40 | 40ft cable AC Voltage Sensor | |
ACV60 | 60ft cable AC Voltage Sensor | |
ACV100 | 100ft cable AC Voltage Sensor |
Kunden, die diesen Artikel gesehen haben, sahen auch