AKCP securityProbe 5E-X60
Monitor the physical environment and receive alerts of any disturbances, such as unauthorized intruders, security breaches, high temperatures, smoke, water leakages, power outages and more.
- Embedded web server displays sensor information and live video from connected cameras
- Control PTDZ cameras directly from the web interface
- Record digital video to remote servers or internal memory, or send live images to your own website
- Connect Digital Cameras, and simultaneously display images up to 640×480 resolution
- Receive notifications of anomalous events via email, SMS / MMS, SNMP traps, and many more
- Integrates with network management systems via SNMPv1 and Encrypted SNMPv3
- Stream video and sensor information directly to your cellphone or PDA
- Ability to connect external GPRS / GSM modem, Bluetooth and WiFi USB adapters
- Uses Linux operating system for maximum stability and flexibility
- Virtual Sensors monitor power, Modbus, network devices, and other SNMP based equipment
- Built-in graphing and data logging, internally or to a remote PC
- Platform independent; free firmware upgrades and utilities from AKCess Pro
- Monitor up to 500 intelligent sensors using expansion modules ( E-Opto 16 and E-Sensor 8 )
- Compatible with complete range of AKCess Pro Intelligent Sensors
- Full Modbus support : Modbus Master / Slave, Modbus RTU, Modbus over TCP / IP
Monitor the physical environment and receive alerts of any disturbances, such as unauthorized intruders, security breaches, high temperatures, smoke, water leakages, power outages and more.
Compatible with the AKCP range of Intelligent Sensors, the SEC5E-X60 provides a complete environmental, access control and security solution for up to 500 connected sensors.
The securityProbe 5E-X60 has 60x 2 Wire Dry Contacts. An additional 2 Gigabyte SD card can be installed to provide greater storage capacity.
The SEC5E-X60 boasts High Speed USB 2.0 connectivity with ports available to connect 1x EDGE-180M USB Modem.
Networked Monitoring
It is TCP / IP compliant and runs lighttpd web server including https (SSL), Bash, Perl, Telnet, PHP, Email and Nagios.
The SEC5E-X60 has an easy-to-use web-based user interface for sensor configuration, data collection and visual graphing.
The SEC5E-X60 supports SNMP v3 with full encryption.
The securityProbe 5E-X60 also supports Modbus Master / Slave, Modbus RTU and Modbus over TCP / IP creating a unique, easy to configure Modbus to SNMP gateway.
The web-based interface is written in PHP allowing end-user changes such as language translation. The SEC5E-X60 has a battery time of day clock for accurate record keeping.
Compatible with the AKCP range of Intelligent Sensors, the SEC5E-X60 provides a complete environmental, access control and security solution for up to 500 connected sensors.
The securityProbe 5E-X60 has 60x 2 Wire Dry Contacts. An additional 2 Gigabyte SD card can be installed to provide greater storage capacity.
The SEC5E-X60 boasts High Speed USB 2.0 connectivity with ports available to connect 1x EDGE-180M USB Modem.
Networked Monitoring
It is TCP / IP compliant and runs lighttpd web server including https (SSL), Bash, Perl, Telnet, PHP, Email and Nagios.
The SEC5E-X60 has an easy-to-use web-based user interface for sensor configuration, data collection and visual graphing.
The SEC5E-X60 supports SNMP v3 with full encryption.
The securityProbe 5E-X60 also supports Modbus Master / Slave, Modbus RTU and Modbus over TCP / IP creating a unique, easy to configure Modbus to SNMP gateway.
The web-based interface is written in PHP allowing end-user changes such as language translation. The SEC5E-X60 has a battery time of day clock for accurate record keeping.
Expandable Options
SecurityProbe 5E-X60?s OnBoard Architecture
Up to 8 of AKCess Pro?s Intelligent Sensors can be connected to the securityProbe 5E-X60. When plugged in, sensors automatically configure themselves and go ?online?. Using the either the E-sensor8, or the E-opto16 expansion modules, up to 500 sensors can be connected to a single unit. Our easy-to-use port numbering system allows you to setup the securityProbe 5E-X60 within minutes.
Notifications & False Message Filter
Notifications
Up to 8 of AKCess Pro?s Intelligent Sensors can be connected to the securityProbe 5E-X60. When plugged in, the sensor automatically configures itself and goes online. Using the either the E-sensor 8, or the E-opto 16 expansion modules, up to 500 sensors can be connected to a single unit. Our easy-to-use web based interface allows you to setup the securityProbe 5E-X60 within minutes. When online, the sensors use their 4 levels of threshold checking and report any status change.
Notifications and alarms can be dependent on the states of multiple sensors, and can be configured to escalate in severity over time. The notification system can alert you of a problem via email, SMS messages and telephone calls, (additional hardware required), or send a message to any commercial network monitoring system using SNMP traps. The securityProbe 5E-X60 can automatically switch a relay on or off, wake-up or shutdown a remote server, send pictures and data via FTP, send a FAX, run your custom script and many more versatile functions.
The securityProbe 5E-X60 can automatically push out the complete status of the unit and sensors via the Heartbeat Message feature. This can be setup to be sent through e-mail, SMS or SNMP traps. A HTTP get script can also be chosen, allowing the data to be pushed to web servers.
False Message Filter
In order to prevent false alarms, the securityProbe 5E-X60 allows extensive filtering of events. You can limit events based on the time of day or the day of the week. You can also limit the number of alerts per hour, so that you are not swamped with many messages. This is especially important with the sensor like the motion detector where you may want to process an event only when the business premises are closed.
Specifications
Dimension
Expansion Ports
Mounting
Power Requirements
Status Indication
Output
Inputs
Operating Environment
Components
Power Consumption
MTBF
Expansion Modules
Ordering Information
- E-Opto16
- E-Sensor8
SecurityProbe 5E-X60?s OnBoard Architecture
Up to 8 of AKCess Pro?s Intelligent Sensors can be connected to the securityProbe 5E-X60. When plugged in, sensors automatically configure themselves and go ?online?. Using the either the E-sensor8, or the E-opto16 expansion modules, up to 500 sensors can be connected to a single unit. Our easy-to-use port numbering system allows you to setup the securityProbe 5E-X60 within minutes.
- AKCP iMX25 CPU
- 128 MB of SDRAM
- 128 MB OnBoard NAND Flash
- 10/100 Mbps Ethernet Port
- 1x USB 2.0 Modem Port
- 4x BNC Video Ports
- 60x Dry Contact Inputs
- RS485 Ports
- Internal Audio Speaker
- Internal Microphone
- 8 Full AutoSense RJ-45 Ports (Maximum of 500 Sensors)
- 4x RJ-45 Expansion Ports
Notifications & False Message Filter
Notifications
Up to 8 of AKCess Pro?s Intelligent Sensors can be connected to the securityProbe 5E-X60. When plugged in, the sensor automatically configures itself and goes online. Using the either the E-sensor 8, or the E-opto 16 expansion modules, up to 500 sensors can be connected to a single unit. Our easy-to-use web based interface allows you to setup the securityProbe 5E-X60 within minutes. When online, the sensors use their 4 levels of threshold checking and report any status change.
Notifications and alarms can be dependent on the states of multiple sensors, and can be configured to escalate in severity over time. The notification system can alert you of a problem via email, SMS messages and telephone calls, (additional hardware required), or send a message to any commercial network monitoring system using SNMP traps. The securityProbe 5E-X60 can automatically switch a relay on or off, wake-up or shutdown a remote server, send pictures and data via FTP, send a FAX, run your custom script and many more versatile functions.
The securityProbe 5E-X60 can automatically push out the complete status of the unit and sensors via the Heartbeat Message feature. This can be setup to be sent through e-mail, SMS or SNMP traps. A HTTP get script can also be chosen, allowing the data to be pushed to web servers.
False Message Filter
In order to prevent false alarms, the securityProbe 5E-X60 allows extensive filtering of events. You can limit events based on the time of day or the day of the week. You can also limit the number of alerts per hour, so that you are not swamped with many messages. This is especially important with the sensor like the motion detector where you may want to process an event only when the business premises are closed.
Specifications
Dimension
- Size : 18? x 5? x 3.45?
- Weight : 3.1 Kg
Expansion Ports
- 2x individual RJ-45 expansion ports
- Allows for quad directional
- placement
- 115.2K BPS data transfer rate
- Simultaneous functionality between
- Expansion ports & RS485 port
- threshold status
Mounting
- 1U Rack mount brackets included
Power Requirements
- Voltage 7.0 ? 9 V / >= 3 Amp
Status Indication
- LED indication for Power
- LED for Network Connectivity
- LED for sensor online and threshold status
Output
- Ext. Speaker Out, 3.5mm jack (Analog)
- Mic Out, 3.5mm jack (Analog) for modem application
Inputs
- 8x RJ-45 ports for connecting AKCess Pro sensors
- 2x RJ-45 Expansion ports
- 1x USB 2.0 Modem Port
- 4x BNC Video Ports
- Audio In (Analog) 3.5mm jack
- RS485, 2 pin Terminal box, (used for Modbus)
- 60x Dry Contact Inputs
Operating Environment
- Temp : Min. -35° C ? Max. +55°C
- Humidity : Min. 20% ? Max. 80% (Non-Condensing)
Components
- Manufactured using highly integrated, low power surface mount technology to ensure long term reliability.
- AKCP iMX25 Processor
- 128 MB On-Board NAND Flash
- HC SD Memory Slot on-board (up to 16GB
Power Consumption
- Typical 6.150 Watt, 0.82A
MTBF
- 400,000 Hours
Expansion Modules
- 8 Port Intelligent Sensors Module (E-sensor8)
- 16 Port Dry Contacts Module (E-opto16)
- Extendable up to 1,000 Feet or 300 meters
- Expansion modules are daisy chainable
Ordering Information
Product Model | Order Number | Description |
---|---|---|
securityProbe 5E | ||
SEC5ESVA | 940075 | securityProbe5E |
SEC5ESVA-DCW | securityProbe 5E with internal 40-60 VDC power supply | |
SEC5ESVA-X20 | 940078 | securityProbe5E-X20 |
SEC5ESVA-X20DCW | securityProbe5E-X20 with internal 40-60 VDC power supply | |
SEC5ESVA-X60 | 940070 | securityProbe5E-X60 |
SEC5ESVA-X60DCW | securityProbe5E-X60 with internal 40-60 VDC power supply | |
securityProbe 5E Standard Video | ||
SEC5ESV | 940039 | securityProbe5E Standard Video |
SEC5ESV-DCW | securityProbe 5E Standard Video with internal 40-60 VDC power supply | |
SEC5ESV-X20 | 940089 | securityProbe5E-X20 Standard Video |
SEC5ESV-X20DCW | securityProbe5E-X20 Standard Video with internal 40-60 VDC power supply | |
SEC5ESV-X60 | 940040 | securityProbe5E-X60 Standard Video |
SEC5ESV-X60DCW | 940101 | securityProbe5E-X60 Standard Video with internal 40-60 VDC power supply |
securityProbe 5E Standard | ||
SEC5ES | 940038 | securityProbe5E Standard |
SEC5ES-DCW | securityProbe 5E Standard with internal 40-60 VDC power supply | |
SEC5ES-X20 | 940041 | securityProbe5E-X20 Standard |
SEC5ES-X20DCW | 940107 | securityProbe5E-X20 Standard with internal 40-60 VDC power supply |
SEC5ES-X60 | 940042 | securityProbe5E-X60 Standard |
SEC5ES-X60DCW | 940097 | securityProbe5E-X60 Standard with internal 40-60 VDC power supply |
securityProbe / sensorProbe+ Expansion Units | ||
E-OP16 | 940058 | E-opto16 with 5ft cable |
E-IS8N | 940028 | E-sensor8 with 5ft cable |
E-IS8N-DIN | E-sensor8 with 5ft cable DIN rail mounting | |
IODC8 | 940031 | IO-Digital8 adapter with 8 dry contact via 8x 2pin connectors |
IODCRJ8 | 940032 | IO-Digital8 with 8 dry contacts via 2x RJ45 port |
Internal Modem (securityProbe only) | ||
SECM4E | 940202 | Internal 4G Modem - EU frequency* * Does not support voice calls |
SECM4G | Internal 4G Modem - Global frequency | |
USB to Serial Adapter (securityProbe only) | ||
USBRS232 | 940084 | USB to serial adapter (USB 2.0 to RS232 Convertor) |
securityProbe 5ESV Cameras | ||
HD-DC | 940029 | High Definition Digital Camera (5M cable)* |
HD-PTDC | 940030 | High Definition Pan Tilt Dome Camera (5M cable)* |
Note: High Definition camera is only compatible with 5ESV units. | ||
securityProbe 5ESVA Cameras | ||
UMC-PAL | 944072 | Universal Mount Digital Camera PAL |
UMC-NTSC | Universal Mount Digital Camera NTSC (for USA) | |
PTDC-PAL | 944073 | Pan Tilt Digital Camera PAL |
PTDC-NTSC | Pan Tilt Digital Camera NTSC (for USA) | |
Note: UMC and PTDC compatible with 5ESVA units only |
Kunden, die diesen Artikel gesehen haben, sahen auch