MOXA AWK-1131A Series
Industrial IEEE 802.11n wireless AP/client
- IEEE 802.11a/b/g/n compliant
- Up to 300 Mbps data rate
- MIMO technology increases data throughput and range
- Supports client-based Turbo Roaming
- One Gigabit Ethernet LAN port
- Higher noise avoidance protection
- Supports 802.11 dynamic frequency selection (DFS) (Pending)
Der AWK-1131A von Moxa ist als industrieller Wireless Access Point bzw. Client eine ideale Lösung für den wachsenden Bedarf an Komponenten mit höheren Datenraten. Er unterstützt die IEEE 802.11n-Technologie und erzielt Nettodatenraten von bis zu 300 Mbps.
Der AWK-1131A erfüllt die Industriestandards und Zulassungsbedingungen hinsichtlich Betriebstemperatur, Versorgungsspannung, Überspannung, elektrostatischer Entladung und Vibrationen. Die beiden redundanten DC-Betriebsspannungseingänge erhöhen die Zuverlässigkeit der Stromversorgung. Der AWK-1131A kann wahlweise im 2,4- oder 5-GHz-Frequenzbereich betrieben werden und ist abwärtskompatibel mit bestehenden 802.11a/b/g-Systemen.
Damit ist die Zukunftssicherheit Ihrer Investitionen in Wireless-Ressourcen gewährleistet.
Der AWK-1131A erfüllt die Industriestandards und Zulassungsbedingungen hinsichtlich Betriebstemperatur, Versorgungsspannung, Überspannung, elektrostatischer Entladung und Vibrationen. Die beiden redundanten DC-Betriebsspannungseingänge erhöhen die Zuverlässigkeit der Stromversorgung. Der AWK-1131A kann wahlweise im 2,4- oder 5-GHz-Frequenzbereich betrieben werden und ist abwärtskompatibel mit bestehenden 802.11a/b/g-Systemen.
Damit ist die Zukunftssicherheit Ihrer Investitionen in Wireless-Ressourcen gewährleistet.
Improved Higher Data Rate and Channel Capacity
Specifications for Industrial-grade Applications
- High-speed wireless connectivity with up to 300 Mbps data rate
- MIMO technology to improve the capability of transmitting and receiving multiple data streams
- Increased channel width with channel bonding technology
- Supports flexible channel selection to build up wireless communication system with DFS (Pending)
Specifications for Industrial-grade Applications
- Redundant DC power inputs
- Integrated design with enhanced protection technology to gain higher noise avoidance level
- IP30 compact size aluminum housing
- WLAN Interface
- Standards
- IEEE 802.11a/b/g for Wireless LAN
- IEEE 802.11i for Wireless Security
- IEEE 802.3 for 10BaseT
- IEEE 802.3u for 100BaseT(X)
- IEEE 802.3ab for 1000BaseT
Spread Spectrum and Modulation (typical) - DSSS with DBPSK, DQPSK, CCK
- OFDM with BPSK, QPSK, 16QAM, 64QAM
- 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBPSK @ 11 Mbps
- 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps, QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps
- 802.11n: 64QAM @ 300 Mbps to BPSK @ 6.5 Mbps (multiple rates supported)
- Operating Channels (central frequency)
- US:
- 2.412 to 2.462 GHz (11 channels)
- 5.180 to 5.240 (4 channels)
- 5.260 to 5.320 (4 channels)*
- 5.500 to 5.700 GHz (8 channels - excludes 5.600 to 5.640 GHz)*
- 5.745 to 5.825 GHz (5 channels)
- EU:
- 2.412 to 2.472 GHz (13 channels)
- 5.180 to 5.240 (4 channels)
- 5.260 to 5.320 (4 channels)*
- 5.500 to 5.700 GHz (11 channels)*
- JP:
- 2.412 to 2.484 GHz (14 channels, DSSS)
- 5.180 to 5.240 (4 channels)
- 5.260 to 5.320 (4 channels)*
- 5.500 to 5.700 GHz (11 channels)*
- * Note: These channels are not supported in AWK-1131A as the DFS certification has not been passed. Please check Moxa’s website for the most up-to-date DFS status.
- Security
- SSID broadcast enable/disable
- Firewall for MAC/IP/Protocol/Port-based filtering
- 64-bit and 128-bit WEP encryption, WPA /WPA2-Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP and AES)
- Transmission Rates
- 802.11b: 1, 2, 5.5, 11 Mbps
- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
- 802.11n: 6.5 to 300 Mbps (multiple rates supported)
- TX Transmit Power (per antenna port)
- 2.4 GHz
- 802.11b:
- Typ. 23±1.5 dBm @ 1 Mbps
- Typ. 20±1.5 dBm @ 5 Mbps
- Typ. 19±1.5 dBm @ 11 Mbps
- 802.11g:
- Typ. 20±1.5 dBm @ 6 to 24 Mbps
- Typ. 19±1.5 dBm @ 36 Mbps
- Typ. 18±1.5 dBm @ 48 Mbps
- Typ. 17±1.5 dBm @ 54 Mbps
- 802.11n (20 MHz):
- MCS0, 8@20 MHz: Typ. 20 dBm (± 1.5 dBm)
- MCS7, 15@20 MHz: Typ. 16 dBm (± 1.5 dBm)
- MCS0, 8@40 MHz: Typ. 20 dBm (± 1.5 dBm)
- MCS7, 15@40 MHz: Typ. 16 dBm (± 1.5 dBm)
- 5 GHz
- 802.11a:
- Typ. 20±1.5 dBm @ 6 to 24 Mbps
- Typ. 19±1.5 dBm @ 36 Mbps
- Typ. 16±1.5 dBm @ 48 Mbps
- Typ. 15±1.5 dBm @ 54 Mbps
- 802.11n (20/40 MHz):
- MCS0, 8@20 MHz: Typ. 19 dBm (± 1.5 dBm)
- MCS7, 15@20 MHz: Typ. 14 dBm (± 1.5 dBm)
- MCS0, 8@40 MHz: Typ. 18 dBm (± 1.5 dBm)
- MCS7, 15@40 MHz: Typ. 14 dBm (± 1.5 dBm)
- RX Sensitivity
- 2.4 GHz
- 802.11b:
- -92 dBm @ 1 Mbps,
- -90 dBm @ 2 Mbps,
- -88 dBm @ 5.5 Mbps,
- -84 dBm @ 11 Mbps
- 802.11g:
- -87 dBm @ 6 Mbps,
- -86 dBm @ 9 Mbps,
- -85 dBm @ 12 Mbps,
- -82 dBm @ 18 Mbps,
- -80 dBm @ 24 Mbps,
- -76 dBm @ 36 Mbps,
- -74 dBm @ 48 Mbps,
- -72 dBm @ 54 Mbps
- 802.11n:
- -69 dBm @ MCS15 20MHz
- -71 dBm @ MCS7 20MHz
- 5 GHz
- 802.11a:
- -87 dBm @ 6 Mbps,
- -86 dBm @ 9 Mbps,
- -85 dBm @ 12 Mbps,
- -82 dBm @ 18 Mbps,
- -80 dBm @ 24 Mbps,
- -76 dBm @ 36 Mbps,
- -74 dBm @ 48 Mbps,
- -72 dBm @ 54 Mbps
- 802.11n:
- -68 dBm @ MCS15 40MHz
- -69 dBm @ MCS15 20MHz
- -70 dBm @ MCS7 40MHz
- -71 dBm @ MCS7 20MHz
- General Protocols Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, PPPoE, DHCP, LLDP
- AP-only Protocols ARP, BOOTP, DHCP
- Default Antennas 2 dual-band omni-directional antennas, 2 dBi, RP-SMA (male)
- Connector for External Antennas RP-SMA (female)
- RJ45 Ports 1, 10/100/1000BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
- Console Port RS-232 (RJ45-type)
- Reset Present
- LED Indicators PWR, FAULT, STATE, SIGNAL, WLAN, 10/100/1000 (RJ45 port)
- Housing Metal, providing IP30 protection
- Dimensions 58 x 115 x 70 mm (2.28 x 4.53 x 2.76 in)
- Installation DIN-rail mounting (standard), wall mounting (optional)
- Operating Temperature Standard Models: 0 to 60°C (32 to 140°F)
- Storage Temperature -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity 5% to 95% (non-condensing)
- Input Voltage 12 to 48 VDC, redundant dual DC power inputs
- Connector 4-pin removable terminal block
- Power Consumption 6.72 W (12 V/0.56 A to 48 V/0.14 A), 25°C
- Reverse Polarity Protection Present
- Safety UL 60950-1, EN 60950-1
- EMC EN 301 489-1/17, FCC Part 15 Subpart B Class B, EN 55022/55024
- Radio EN 300 328, EN 301 893, TELEC
- MTBF 810,022 hrs
Protocol Support
Interface
Physical Characteristics
Environmental Limits
Power Requirements
Standards and Certifications
Reliability
Kunden, die diesen Artikel gesehen haben, sahen auch