MOXA NE-4120A
Device server module for RS-422/485 devices, supports 10/100BaseT(x) with 5-pin Ethernet pin header
- 10/100 Mbps Ethernet interface
- Up to 230.4 kbps baudrate support
- Choice of operation modes: Real COM, TCP Server, TCP Client, and UDP
- DHCP, BootP, Static IP, and ARP supported
- SNMP and e-mail alerts for event trapping and notification
- Half the size of a credit card—only 57 × 40 mm
- Low power consumption at 1.5W, with single +5V input
Moxas Embedded NE-4100-Geräteserver wurden für Hersteller entwickelt, die ihre seriellen Geräte um leistungsfähige Netzwerkkonnektivität erweitern möchten.
Die Geräteserver können zur schnellen Konvertierung von Geräten mit einer standardmäßigen seriellen Schnittstelle in ein Ethernet-fähiges Gerät verwendet werden. Sie unterstützen 10/100 Mbps Ethernet und bieten einsatzbereite Betriebsmodi, einschließlich TCP-Server, TCP-Client und UDP. Darüber hinaus ist ein Real COM-Treiber im Lieferumfang enthalten, um die Rückwärtskompatibilität mit älterer Software sicherzustellen.
SNMP and E-mail Alerts for Event Trap and Notification
NE-4100 embedded device servers can be configured to send an SNMP trap or e-mail under the following conditions: Cold/warm start
Password authentication failure
Change in DSR/DCD line signal
Change in IP address
Change in password
Form Factor
Type
Ready-to-go pin header modules
Dimensions
57 × 40 mm (2.24 x 1.57 in)
Weight
40 g
Ethernet Interface
Number of Ports
1
Speed
10/100 Mbps, auto MDI/MDIX
Magnetic Isolation Protection
1.5 kV built-in
Connector
RJ45
Serial Interface
Number of Ports
2
Serial Standards
RS-485 Data Direction Control
ADDC® (automatic data direction control)
Serial Communication Parameters
Data Bits
5, 6, 7, 8
Stop Bits
1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control
DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF
Baudrate
110 bps to 230.4 kbps
Serial Signals
TTL
RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422
Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w
Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w
Data+, Data-, GND
Digital I/O Pins
GPIO
4 programmable I/O pins
Software
Network Protocols
ICMP, ARP, IPv4, TCP, UDP, DHCP, Telnet, HTTP, SNMP V1/V2c, SMTP
Configuration Options
Web Console, Serial Console, Telnet Console, Windows Utility
Windows Real COM Drivers
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Fixed TTY Drivers
SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Linux Real TTY Drivers
Linux 2.4.x, 2.6.x, 3.x
Operation Modes
Real COM, TCP Server, TCP Client, UDP
Environmental Limits
Operating Temperature
Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature
-40 to 60°C (-40 to 140°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Altitude
Up to 2000 m
Note Please contact us if you require products guaranteed to function properly at higher altitudes.
Power Requirements
Input Voltage
5 VDC (±5%)
Power Consumption
290 mA @ 5 VDC max.
Standards and Certifications
EMC
CE, FCC
EMI
EN 55022 Class B, FCC Part 15 Subpart B Class A
EMS
EN 55024,
EN 61000-4-2 (ESD),
EN 61000-4-3 (RS),
EN 61000-4-4 (EFT),
EN 61000-4-5 (Surge),
EN 61000-4-6 (CS),
EN 61000-4-8,
EN 61000-4-11
Green Product
RoHS, CRoHS, WEEE
Reliability
Automatic Reboot Trigger
Built-in WDT (watchdog timer)
MTBF (mean time between failures)
290,276 hrs
Ordering Information
NE-4100 embedded device servers can be configured to send an SNMP trap or e-mail under the following conditions: Cold/warm start
Password authentication failure
Change in DSR/DCD line signal
Change in IP address
Change in password
Form Factor
Type
Ready-to-go pin header modules
Dimensions
57 × 40 mm (2.24 x 1.57 in)
Weight
40 g
Ethernet Interface
Number of Ports
1
Speed
10/100 Mbps, auto MDI/MDIX
Magnetic Isolation Protection
1.5 kV built-in
Connector
RJ45
Serial Interface
Number of Ports
2
Serial Standards
- Port 1:RS-232
- Port 2:TTL console port
RS-485 Data Direction Control
ADDC® (automatic data direction control)
Serial Communication Parameters
Data Bits
5, 6, 7, 8
Stop Bits
1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control
DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF
Baudrate
110 bps to 230.4 kbps
Serial Signals
TTL
- Port 1: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- Port 2: TxD, RxD, GND
RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422
Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w
Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w
Data+, Data-, GND
Digital I/O Pins
GPIO
4 programmable I/O pins
Software
Network Protocols
ICMP, ARP, IPv4, TCP, UDP, DHCP, Telnet, HTTP, SNMP V1/V2c, SMTP
Configuration Options
Web Console, Serial Console, Telnet Console, Windows Utility
Windows Real COM Drivers
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Fixed TTY Drivers
SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Linux Real TTY Drivers
Linux 2.4.x, 2.6.x, 3.x
Operation Modes
Real COM, TCP Server, TCP Client, UDP
Environmental Limits
Operating Temperature
Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature
-40 to 60°C (-40 to 140°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Altitude
Up to 2000 m
Note Please contact us if you require products guaranteed to function properly at higher altitudes.
Power Requirements
Input Voltage
5 VDC (±5%)
Power Consumption
290 mA @ 5 VDC max.
Standards and Certifications
EMC
CE, FCC
EMI
EN 55022 Class B, FCC Part 15 Subpart B Class A
EMS
EN 55024,
EN 61000-4-2 (ESD),
EN 61000-4-3 (RS),
EN 61000-4-4 (EFT),
EN 61000-4-5 (Surge),
EN 61000-4-6 (CS),
EN 61000-4-8,
EN 61000-4-11
Green Product
RoHS, CRoHS, WEEE
Reliability
Automatic Reboot Trigger
Built-in WDT (watchdog timer)
MTBF (mean time between failures)
290,276 hrs
Ordering Information
Available Modules | |
NE-4120A | Device server module for RS-422/485 devices, supports 10/100BaseT(x) with 5-pin Ethernet pin header |
NE-4120A-T | Device server module for RS-422/485 devices, supports 10/100BaseT(x) with 5-pin Ethernet pin header, -40 to 75°C operating temperature |
NE-4120-ST | Starter kit for the NE-4120A (module not included) *NOTE: Starter kits do not include the module. Please order modules and evaluation kits separately. |
NE-4120A-CMD | Serial Command Mode Version of NE-4120A, 100 Mbps Ethernet Network Enabler for RS-422/485 Devices, with 5-pin Ethernet pin header |
Kunden, die diesen Artikel gesehen haben, sahen auch