MOXA TCF-142-RM Series
RS-232/422/485 to fiber slide-in modules for the NRack System
- Extend RS-232/422/485 transmission up to:
- - 40 km with single mode
- - 5 km with multi-mode
- 1K or 150K ohm adjustable pull high/low resistor
- "Ring" and "Point-to-Point" transmission supported
Die TCF-142-RM-Serie mit Seriell-zu-Glasfaser-Konvertern besteht aus Einschubmodulen für das Gehäuse TRC-190. Die Module übernehmen die Konvertierung von RS-232, RS-422 oder RS-485 in ein Glasfasersignal.
Optical Fiber Side
Fiber Connector
SC or ST
Cable Requirements
Single-mode: 8.3/125, 8.7/125, 9/125, or 10/125 μm
Multi-mode: 50/125, 62.5/125, or 100/140 μm
Transmission Distance
Single-mode: 40 km
Multi-mode: 5 km
Wavelength
Single-mode: 1310 nm
Multi-mode: 850 nm
Tx Output
Single-mode: > -5 dBm
Multi-mode: > -5 dBm
Rx Sensitivity
Single-mode: -25 dBm
Multi-mode: -20 dBm
Point-to-Point Transmission
Half-duplex or full-duplex
Ring Transmission
Half-duplex
RS-232/422/485 Side
Connector
DB9
RS-232 Signals
TxD, RxD, GND
RS-422 Signals
TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w Signals
TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w Signals
Data+, Data-, GND
Baudrate
50 bps to 921.6 kbps
ESD Protection
15 kV for all signals
Physical Characteristics
Dimensions
86.8 x 136.5 x 21 mm (3.42 x 5.37 x 0.83 in)
Environmental Limits
Operating Temperature
0 to 60°C (32 to 140°F)
Storage Temperature
-20 to 75°C (-4 to 167°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Power Requirements
Input Voltage
12 VDC
Power Consumption
150 mA @ 12 V
Standards and Certifications
EMC
CE, FCC
EMI
FCC Part 15 Subpart B Class A
EMS
EN 61000-4-2 (ESD) Level 3,
EN 61000-4-3 (RS) Level 2,
EN 61000-4-4 (EFT) Level 2,
EN 61000-4-5 (Surge) Level 2,
EN 61000-4-6 (CS) Level 2,
EN 61000-4-8 (PFMF) Level 3
Freefall
IEC 60068-2-32
Green Product
RoHS, CRoHS, WEEE
MTBF (mean time between failures)
Time
514,926 hrs
Database
Telcordia (Bellcore), GB
Fiber Connector
SC or ST
Cable Requirements
Single-mode: 8.3/125, 8.7/125, 9/125, or 10/125 μm
Multi-mode: 50/125, 62.5/125, or 100/140 μm
Transmission Distance
Single-mode: 40 km
Multi-mode: 5 km
Wavelength
Single-mode: 1310 nm
Multi-mode: 850 nm
Tx Output
Single-mode: > -5 dBm
Multi-mode: > -5 dBm
Rx Sensitivity
Single-mode: -25 dBm
Multi-mode: -20 dBm
Point-to-Point Transmission
Half-duplex or full-duplex
Ring Transmission
Half-duplex
RS-232/422/485 Side
Connector
DB9
RS-232 Signals
TxD, RxD, GND
RS-422 Signals
TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w Signals
TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w Signals
Data+, Data-, GND
Baudrate
50 bps to 921.6 kbps
ESD Protection
15 kV for all signals
Physical Characteristics
Dimensions
86.8 x 136.5 x 21 mm (3.42 x 5.37 x 0.83 in)
Environmental Limits
Operating Temperature
0 to 60°C (32 to 140°F)
Storage Temperature
-20 to 75°C (-4 to 167°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Power Requirements
Input Voltage
12 VDC
Power Consumption
150 mA @ 12 V
Standards and Certifications
EMC
CE, FCC
EMI
FCC Part 15 Subpart B Class A
EMS
EN 61000-4-2 (ESD) Level 3,
EN 61000-4-3 (RS) Level 2,
EN 61000-4-4 (EFT) Level 2,
EN 61000-4-5 (Surge) Level 2,
EN 61000-4-6 (CS) Level 2,
EN 61000-4-8 (PFMF) Level 3
Freefall
IEC 60068-2-32
Green Product
RoHS, CRoHS, WEEE
MTBF (mean time between failures)
Time
514,926 hrs
Database
Telcordia (Bellcore), GB
Ordering Information | |
TCF-142-M-SC-RM | RS-232/422/485 to multi-mode fiber slide-in module converter, SC connector |
TCF-142-M-ST-RM | RS-232/422/485 to multi-mode fiber slide-in module converter, ST connector |
TCF-142-S-SC-RM | RS-232/422/485 to single-mode fiber slide-in module converter, SC connector |
TCF-142-S-ST-RM | RS-232/422/485 to single-mode fiber slide-in module converter, ST connector |
Kunden, die diesen Artikel gesehen haben, sahen auch