Advantech EKI-1528 / I / TI / N
8-port RS-232/422/485 Serial Device Server
- 8 or 16-port RS-232/422/485 serial communication
- Provides 2 x 10/100/1000 Mbps Ethernet ports for LAN redundancy
- Supports up to 976.5 kbps, and any baud rate setting
- Provides COM port redirection (Virtual COM), TCP and UDP operation modes
- Provides rich configuration methods: Windows utility, Telnet console, Web Browser, and serial console ƒ
- Built-in 15 KV ESD protection for all serial signals
- SNMP MIB-II for network management ƒ
- Built-in buzzer for easy location
- Standard 1U rackmount size
- Rear wiring
- Automatic RS-485 data flow control
- "I" models support a wide operating temperature
The EKI-1528 and EKI-1526 are industrial-grade network-based serial device servers for connecting up to 8 or 16 serial RS-232/422/485 devices, such as CNCs, PLCs, scales and scanners, directly to a TCP/IP network. The EKI-1528 and EKI-1526 feature two independent Ethernet ports and MAC addresses to provide a redundant network mechanism to guarantee Ethernet network reliability. The EKI-1528 and EKI-1526 provide a simple and cost-effective way to bring the advantages of remote management and data accessibility to thousand of devices that can´t connect to an Ethernet network. The EKI-1528 and EKI-1526 offer multiple ways to configure through Windows utility, Web Browser, serial console or Telnet console, these methods make it easy manage many EKI-1528 and EKI-1526 or serial devices on your network.
Specifications
Ethernet Communications
Serial Communication
Software
Mechanics
General
Power Requirements
Environment
Regulatory Approvals
Ordering Information
Ethernet Communications
Compatibility | IEEE 802.3, IEEE 802.03u, IEEE802.3ab |
Speed | 10/100/1000 Mbps, auto MDDI/MDIX |
No. of Ports | 2 |
Port Connector | 8-pin RJ45 |
Protection | Built-in 1,5KV magnetic isolation |
Serial Communication
Port Type | RS-232/422/485, software selectable |
No. of Ports | EKI-1528/EKI-1528I/EKI-1528TI/EKI-1528N:8 EKI-1526/EKI-1526I/EKI-1526TI/EKI-1526N:16 |
Port Connector | DB9 male or 8-pin RJ45 |
Data Bits | 5, 6, 7, 8 |
Stop Bits | 1, 1.5, 2 |
Parity | None, Odd, Even, Space, Mark |
Flow Control | XON/XOFF, RTS/CTS, DTR/DSR |
Baud Rate | 50 bps ~ 976,5 kbps, any baud rate setting 16 ports up to 230,4kbps simultaneously |
Serial Signals | RS-232:TxD, RxD, CTS, RTS, DTR, DSR, DCD, GND, RI RS-422:TxD+, TxD-, RxD+, RxD-, GN RS-485: Data+, Data-, GND |
Protection | 15KV ESD for all Signals |
Software
Driver Support | 32-bit/64-bit Windows 2000/XP/Vista/7/8/8.1/10 Widnows Server 2003/2008/2012 and Linux |
Utility Software | Advantech EKI Device Configuration Utility |
Operation Modes | COM Port redirection mode (Virtual COM) TCP/UDP server (polling) mode TCP/UDP client (event handling)mode Pair connection (peer to peer) mode RFC2217 MODE |
Configuration | Windows utility, Telnet console, Web Browser, serial console |
Protocols | ARP, ICMP, IPv6, TCP, UDP, BOOTP/DHCP Client, Auto IP, Telnet, SNMP, HTTP, DNS, SMTP, NTP |
Management | SNMP MIB-II |
Mechanics
Dimensions (WxHxD) | 438x43,6x259,2mm(17,24"x1,71"x10,2" |
Encclosure | SECC chassis |
Mounting | Rack |
General
LED Inddicators | System: Power, System Status LAN:Speed, Link/Active Serial: Tx, Rx |
Alert Tools | Built-in buzzer and RTC (real time clock) |
Reboot Trigger | BUilt-in WDT and push button for hardware reboot |
Power Requirements
Power Input | EKI-1528(I)/EKI-1526(I):100 ~ 240V AC, 50 ~ 60Hz EKI-1528T(I)/EKI-1526T(I): 12 ~ 48V DC, Terminal Block |
Power Consumption | 5,6W |
Environment
Operating Temperature | -10 ~ 60°C (14 ~ 140°F) *I* Model: -40 ~ 75°C (-40 ~ 167°F) |
Storage Temperature | -40 ~ 85°C (-40 ~ 185°F) |
Operating Humidity | 10 ~ 95% RH |
Regulatory Approvals
EMC | CE; FCC Part 15 Subpart B (Class A) |
Ordering Information
EKI-1528 | 8-port RS-232/422/485 Serial Device Server |
EKI-1526 | 16-port RS-232/422/485 Serial Device Server |
EKI-1528T-VDC | 8- port RS-232/422/485 Serial Device Server w/ DC input |
EKI-1526T-DC | 16-port RS-232/422/485 Serial Device Server w/DC Input |
EKI-1528I | 8-port RS-232/422/485 Serial Device Server W/T |
EKI-1526I | 16-port RS-232/422/485 Serial Device Server W/T |
EKI-1528TI-VDC | 8-port RS-232/422/485 Serial Device Server w/ DC W/T Input |
EKI-1526TI-VDC | 16-port RS-232/422/485 Serial Device Server w/DC W/T Input |
EKI-1528N | 8-port RS-232/22/485 Serial Device Server with RJ45 Connector |
EKI-1526N | 16-port RS-232/422/485 Serial Device Server with RJ45 Connector |
Kunden, die diesen Artikel gesehen haben, sahen auch