Logo

MOXA NPort 5600 Series

SPHINX in Europa »  ch es uk it at dk fr nl be  «
Tel: +49 (0) 6201 75437 |  Impressum |  Kontakt |  English version
     

Sie sind hier » MOXA NPort 5600 Series «

MOXA NPort 5600 Series

prodgraf


8/16-Port RS-232 or RS-422/485 Serial Device Servers



Eigenschaften


Beschreibung

NPort® 5610-Geräteserver können komfortabel und transparent bis zu 16 serielle Geräte mit einem Ethernet verbinden, sodass Sie Ihre seriellen Geräte mit einer einfachen Basiskonfiguration vernetzen können. Die Datenübertragung zwischen den seriellen und Ethernet-Schnittstellen erfolgt bidirektional. Mithilfe von NPort® Geräteservern schützen Sie nicht nur Ihre aktuelle Hardwareinvestition, sondern ermöglichen außerdem die zukünftige Netzwerkerweiterung. Sie können das Management ihrer seriellen Geräte zentralisieren und Managementserver über das Netzwerk verteilen.



ProdGrafik

Weitere Informationen

With the NPort® 5600 rackmount series, you not only protect your current hardware investment, but also allow for future network expansion by centralizing the management of your serial devices and distributing management hosts over the network.

Network Readiness for up to 16 Serial Devices

Only basic configuration is needed with the NPort® 5600 to connect up to 16 serial devices to an Ethernet network.

19-inch Rackmount Device Server

NPort® 5600 device servers come with Tx/Rx LEDs for the serial ports on the front panel, and 8 or 16 RJ45 serial port connectors on the rear panel. This makes the NPort® 5600 device servers suitable for standard 19-inch rack mounting, allowing you to simplify operational, maintenance, and administrative tasks.

Real COM/TTY Ports

Real COM/TTY drivers are provided to make the serial ports on the NPort® 5600 recognizable as Real COM ports by Windows, or Real TTY ports by Linux. In addition to supporting basic data transmission and reception, the NPort® drivers also support the RTS, CTS, DTR, DSR, and DCD control signals.

LED Indicators to Ease Your Maintenance Tasks

The System LED, serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The LEDs not only indicate current system and network status, but also help field engineers monitor the status of attached serial devices.

Adjustable Termination and Pull High/Low Resistors

When using termination resistors to prevent serial signal reflection, it is important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible for all environments, the NPort® 5650-8/16 has DIP switches on the bottom panel for setting the termination and pull high/low resistor values.



Ethernet Interface

Number of Ports
1

Speed
10/100 Mbps, auto MDI/MDIX

Connector
8-pin RJ45

Magnetic Isolation Protection
1.5 kV built-in


Optical Fiber Interface (for -M-SC and -S-SC)

100BaseFX
Multi-mode Single-mode
Wavelength 1300 nm 1310 nm
Max. TX -10 dBm 0 dBm
Min. TX -20 sBm -5 dBm
RX Sensitivity -32 dBm -34 dBm
Link Budget 12 dB 29 dB
Typical Distance 5 km (a)
4 km (b)
40 km (c)
Saturation -6 dBm -3 dBm


(a) 50/125 μm, 800 MHz*km fiber optic cable
(b) 62.5/125 μm 500 MHz*km fiber optic cable
(c) 9/125 μm dingle-mode fiber optic cable


Serial Interface

Number of Ports
8 or 16

Serial Standards
NPort 5610: RS-232
NPort 5630: RS-422/485

Connector
RJ45 (8 pins)

RS-485 Data Direction Control
ADDC® (automatic data direction control)

Pull High/Low Resistor for RS-485
1 kΩ, 150 kΩ (NPort 5650-8/16)


Serial Communication Parameters

Data Bits
5, 6, 7, 8

Stop Bits
1, 1.5, 2

Parity
None, Even, Odd, Space, Mark

Flow Control
DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF

Baudrate
50 bps to 921.6 kbps


Serial Signals

RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

RS-422
Tx+, Tx-, Rx+, Rx-, GND

RS-485-4w
Tx+, Tx-, Rx+, Rx-, GND

RS-485-2w
Data+, Data-, GND


Software

Network Protocols
ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP, ARP, PPP, SLIP, RTelnet, RFC2217

Configuration Options
Web Console, Telnet Console, Windows Utility

Windows Real COM Drivers
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded

Fixed TTY Drivers
SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X

Linux Real TTY Drivers
Linux 2.4.x, 2.6.x, 3.x


Mini Screen with Push Buttons (for standard temp. models)

LCD Panel
Liquid Crystal Display on the case

Push Buttons
Four push buttons for convenient on-site configuration


Physical Characteristics

Housing
Metal

Weight
NPort 5610-8: 3340 g
NPort 5610-8-48V: 3160 g
NPort 5630-8, 5650-8-S-SC, 5650-8-M-SC: 3380 g
NPort 5610-16: 3420 g
NPort 5610-16-48V: 3260 g
NPort 5630-16: 3400 g

Dimensions
Without ears: 440 x 45 x 198 mm (17.32 x 1.77 x 7.80 in)
With ears: 480 x 45 x 198 mm (18.90 x 1.77 x 7.80 in)

Environmental Limits

Operating Temperature
Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
High Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F)

Storage Temperature
Standard Models: -40 to 75°C (-40 to 167°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
High Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F)

Ambient Relative Humidity
5 to 95% (non-condensing)

Altitude
Up to 2000 m

Note Please contact us if you require products guaranteed to function properly at higher altitudes.


Power Requirements

Input Voltage
NPort 5610/5630/5650: 100 to 240 VAC, 47 to 63 hz
NPort 5610-48V: ±48 VDC (20 to 72 VDC, -20 to -72 VDC)

Power Consumption
NPort 5610-8/16: 141 mA @ 100 VAC, 93 mA @ 240 VAC
NPort 5630-8/16: 152 mA @ 100 VAC, 98 mA @ 240 VAC
NPort 5610-8/16-48V: 135 mA @ 48 VDC


Standards and Certifications

EMI
EN55022 Class A, FCC part 15 Subpart B Class A

EMS
EN 61000-4-2 ESD: contact 4 kV; air 8 kV
EN 61000-4-3 RS: 3 V/m (80 MHz to 1 GHz)
EN 61000-4-4 EFT: Power 4 kV; Signal 2 kV
EN 61000-4-5 Surge: AC 1 kV (AC models); DC 2 kV (DC/HV models); Signal 1 kV
EN 61000-4-6 CS: 3 V
EN 61000-4-8
EN 61000-4-11: A

Safety
UL 60950-1, EN 60950-1

EMC
55022/24

Medical
EN 60601-1-2 Class B, EN 55011


Reliability

Automatic Reboot Trigger
Built-in WDT (watchdog timer)

MTBF (mean time between failures)
NPort 5610-8: 97,294 hrs
NPort 5610-16: 94,928 hrs
NPort 5610-8-48V: 96,758
NPort 5610-16-48V: 94,417 hrs
NPort 5630-8: 118,405 hrs
NPort 5630-16: 91,483 hrs



Ordering Information
Available Models
NPort 5610-8 8-port RS-232 rackmount device server with RJ45 connectors and 100-240 VAC power input
NPort 5610-8-48V 8-port RS-232 rackmount device server with RJ45 connectors and 48 VDC power input
NPort 5630-8 8-port RS-422/485 rackmount device server with RJ45 connectors and 100-240 VAC power input
NPort 5610-16 16-port RS-232 rackmount device server with RJ45 connectors and 100-240 VAC power input
NPort 5610-16-48V 16-port RS-232 rackmount device server with RJ45 connectors and 48 VDC power input
NPort 5630-16 16-port RS-422/485 rackmount device server with RJ45 connectors and 100-240 VAC power input
Optional Accessories
  • Connection Cables
CBL-RJ45F25-150 8-pin RJ45 to DB25 female cable, 150 cm
CBL-RJ45M25-150 8-pin RJ45 to DB25 male cable, 150 cm
CBL-RJ45F9-150 8-pin RJ45 to DB9 female cable, 150 cm
CBL-RJ45M9-150 8-pin RJ45 to DB9 male cable, 150 cm



PDF

Dokumentation PDF MOXA NPort 5600 Series Datasheet (1618.4 kB)

plus   

Weitere Produkte finden Sie in diesen Gruppen



Copyright © 2013 SPHINX Computer Vertriebs GmbH

AGBNach oben KontaktCookie DirectiveStandorteÜber SPHINX Computer