MOXA UPort 1150 / UPort1150I
1-port RS-232/422/485 USB-to-serial converters with 2 KV isolation protection
- Compatible with USB 2.0
- 12 Mbps USB data rate
- Software selectable RS-232, RS-422, 4-wire RS-485, and 2-wire RS-485
- Drivers provided for Windows (including Vista), WinCE 5.0, and Linux
- 15 KV ESD protection for all serial ports
- 2 KV optical isolation protection (UPort™ 1150I)
- Full modem status LEDs for UPort™ 1150I
Die USB-zu-Seriell-Konverter UPort™ 1150/1150I ermöglichen den Anschluss eines RS-232/422/485-Geräts an Ihren Laptop/Ihre Arbeitsstation über den USB-Port (Universal Serial Bus).
Diese Plug & Play-USB-Lösungen sind mit neuen und älteren RS-232/422/485-Geräten kompatibel und eignen sich perfekt für mobile, Instrumenten- und Point-of-Sale-Anwendungen.
Einfache, problemlose Erweiterung der seriellen Ports
USB-Plug & Play vereinfacht die Erweiterung serieller Ports. Hierzu sind keine IRQ-, DMA- oder I/O-Adressquellen erforderlich. Die Anwender müssen nicht mehr das Gehäuse öffnen oder das System herunterfahren, um COM-Ports hinzuzufügen. Dies spart Einrichtungszeit und Kosten.
Einfache, problemlose Erweiterung der seriellen Ports
USB-Plug & Play vereinfacht die Erweiterung serieller Ports. Hierzu sind keine IRQ-, DMA- oder I/O-Adressquellen erforderlich. Die Anwender müssen nicht mehr das Gehäuse öffnen oder das System herunterfahren, um COM-Ports hinzuzufügen. Dies spart Einrichtungszeit und Kosten.
Instant Plug & Play The MOXA UPort™ 1150/1150I USB-to-serial converters allow you to connect 1 RS-232/422/485 device to your laptop or workstation through the USB (Universal Serial Bus) port. These plug & play USB solutions are compatible with both new and legacy RS-232/422/485 devices, and are perfect for mobile, instrumentation, and point-of sale applications. Simplified, Hassle-free Serial Port Expansion USB plug & play makes serial port expansion easy, and does not require IRQ, DMA, or I/O address resources. Users no longer need to open the chassis or power down the system to add COM ports, saving on setup time and cost. COM Port Numbers Displayed in Windows System Tray When using a UPort™ 1150 or UPort™ 1150I to connect a serial device to your PC, it may be necessary to determine the COM port number assigned to the serial device. A new tool provided by Moxa gives engineers a handy means of determining the COM port number of the device. When the UPort™ is plugged into your computer’s USB port, a UPort™ icon will be placed in the Windows System Tray located in the lower right corner of the desktop. Simply position the cursor over the UPort™ icon, and then wait a few microseconds for an information window showing the COM port number to pop up. When two or more UPort™s are connected to the same computer, the pop-up window will show the COM numbers for all of the UPort™s.
USB Interface
Serial Interface
Performance
Serial Communication Parameters
Serial Signals
Operating Systems
Note:
Please refer to Moxa’s website for the latest driver support information.
Physical Characteristics
Environmental Limits
Note:
Please contact us if you require products guaranteed to function properly at higher altitudes.
Standards and Certifications
Power Requirements
MTBF (mean time between failures)
USB Interface
- Compliance:
USB 1.0/1.1 compliant, USB 2.0 compatible
Connector:
USB type A: UPort 1110/1130/1130I/1150
USB type B: UPort 1150I
Speed:
12 Mbps (Full-Speed USB)
Serial Interface
- Number of Ports:
1
Serial Standards:
UPort 1110: RS-232
UPort 1130/1130I: RS-422/485
UPort 1150/1150I: RS-232/422/485
Connector:
DB9 male
Electrical Isolation:
2 kV (UPort 1130I and 1150I)
Performance
- Baudrate:
50 bps to 921.6 kbps
Serial Communication Parameters
- Data Bits:
5, 6, 7, 8
Stop Bits:
1, 1.5, 2
Parity:
None, Even, Odd, Space, Mark
Flow Control:
RTS/CTS, XON/XOFF
FIFO:
64 bytes
Serial Signals
- RS-232:
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422:
TxD+(B), TxD-(A), RxD+(B), RxD-(A), GND
RS-485-4w:
TxD+(B), TxD-(A), RxD+(B), RxD-(A), GND
RS-485-2w:
Data+(B), Data-(A), GND
RS-485 Data Direction:
ADDC® (Automatic Data Direction Control)
Operating Systems
- Windows Real COM Drivers:
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2012 (x64), Windows Embedded CE 5.0/6.0
Linux Real TTY Drivers:
Linux 2.4.x, 2.6.x, 3.x
Note:
Please refer to Moxa’s website for the latest driver support information.
Physical Characteristics
- Housing:
UPort 1110/1130/1130I/1150: ABS + PC
UPort 1150I: Metal
Weight:
UPort 1110/1130/1130I/1150: 60 g (0.13 lb)
UPort 1150I: 80 g (0.17 lb)
Dimensions:
UPort 1110/1130/1130I/1150: 37.5 x 20.5 x 60 mm (L x W x H)
UPort 1150I: 52 x 80 x 22 mm (L x W x H)
Environmental Limits
- Operating Temperature:
0 to 55°C (32 to 131°F)
Storage Temperature:
-20 to 70°C (-4 to 158°F)
Ambient Relative Humidity:
5 to 95% (non-condensing)
Altitude:
Up to 2000 m
Note:
Please contact us if you require products guaranteed to function properly at higher altitudes.
Standards and Certifications
- EMC:
CE, FCC
EMI:
EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, FCC Part 15
Subpart B Class B
EMS:
EN 55024, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC-61000-4-6, IEC 61000-4-8, IEC-61000-4-11
Green Product:
RoHS, CRoHS, WEEE
Power Requirements
- Power Consumption: UPort 1110: 30 mA @ 5 VDC
UPort 1130: 60 mA @ 5 VDC
UPort 1130I: 65 mA @ 5 VDC
UPort 1150: 77 mA @ 5 VDC
UPort 1150I: 260 mA @ 5 VDC
MTBF (mean time between failures)
- Time:
1,949,025 hrs
Database:
Telcordia (Bellcore), GB
Ordering Information | |
Available Models | |
UPort 1110: | 1-port RS-232 USB-to-serial converter |
UPort 1130: | 1-port RS-422/485 USB-to-serial converter |
UPort 1130I: | 1-port RS-422/485 USB-to-serial converter with 2 kV electrical isolation |
UPort 1150: | 1-port RS-232/422/485 USB-to-serial converter |
UPort 1150I: | 1-port RS-232/422/485 USB-to-serial converter with 2 KV electrical isolation |
Optional Accessories (can be purchased separately) | |
Mini DB9F-to-TB Adapter: | DB9 female to terminal block adapter for RS-422/485 applications |
Kunden, die diesen Artikel gesehen haben, sahen auch