Advantech PCI-1712L
1 MS/s, 12-bit, 16-ch PCI Multifunction Card w/o AO
- 16 single-ended or 8 differential or a combination of analog inputs
- 12-bit A/D converter, with up to 1 MHz sampling rate
- Programmable gain
- Automatic channel/gain scanning
- Onboard FIFO memory (AI: 1,024 samples AO: 32,768 samples)
- 16-ch digital input and 16-ch digital output
- Three 16-bit programmable multifunction counter/timers on 10 MHz
- Auto-calibration (AI/AO)
- PCI-Bus mastering data transfer
- Pre-, post-, about- and delay-trigger data acquisition modes for analog input channels
- Flexible triggering and clocking capabilities
PCI-1712 and PCI-1712L are powerful high-speed multifunction cards for the PCI bus. They feature a 1 MHz 12-bit A/D converter, an onboard FIFO buffer (storing up to 1024 samples for A/D, and up to 32 K samples for D/A conversion). The PCI-1712 cards provide a total of up to 16 single-ended or 8 differential A/D input channels or a mixed combination, two 12-bit D/A output channels, 16 digital input/output channels, and three 10 MHz 16-bit multifunction counter channels. PCI-1712L is a low-cost version without analog output.
Analog Input
Channels
16 single-ended/ 8 differential (software programmable)
Resolution
12 bits
Max. Sampling Rate
Multi-channel, single gain: 1 MS/s
Multi-channel, multi gain: 600 kS/s
Multi-channel, multi gain, unipolar/bipolar: 400 kS/s
FIFO Size
1,024 samples
Note: The sampling rate for each channels will be affected by used channel number. For example, if 4 channels are used, the sampling rate is 600k/4 = 125 kS/s per channel. (multi gain, without unipolar/bipolar mixed)
Overvoltage Protection
30 Vp-p
Input Impedance
100 M W /10 pF (Off), 100 M W /100 pF (On)
Sampling Modes
Software, onboard programmable pacer and external
Trigger Modes
Pre-trigger, post-trigger, delay-trigger and about- trigger
Input Range (V, software programmable) & Absolute Accuracy
* ±1 LSB is added as the derivative for absolute accuracy
Analog Output (PCI-1712 only)
Channels
2
Resolution
12 bits
Output Rate
1 MS/s max.
FIFO Size
32,768 samples
Output Range(Software programmable)
Slew Rate
20 V/μs
Driving Capability
10 mA
Output Impedance
0.1 W max.
Operation Mode
Static update, waveform generation
Accuracy
INLE: ±1 LSB
DNLE: ±1 LSB
Digital I/O
Channels
16
Compatibility
5 V/TTL
Input Voltage
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Output Voltage
Logic 0: 0.8 V max.
Logic 1: 2.0 V min
Output Capability
Sink: 8.0 mA @ 0.8 V
Source: 0.4 mA @ 2.0 V
Pacer/Counter
Channels
3
Resolution
16 bits
Compatibility
5 V/TTL
Max. Input Frequency
10 MHz
Reference Clock
Internal: 10 MHz, 1 MHz, 100 kHz, 10 kHz
External Frequency: 10 MHz max.
General
Bus Type
PCI V 2.2
I/O Connector
1 x 68-pin SCSI female connector
Dimensions (L x H)
175 x 100 mm (6.9" x 3.9")
Power Consumption
Typical: 5 V @ 850 mA, 12 V @ 600 mA
Max.: 5 V @ 1.0 A, 12 V @ 700 mA
Operating Temperature
0 ~ 60°C (32 ~ 140°F)
Storage Temperature
-20 ~ 85°C (-4 ~ 185°F)
Storage Humidity
5 ~ 95% RH non-condensing
Ordering Information
PCI-1712
PCI-1712L
Channels
16 single-ended/ 8 differential (software programmable)
Resolution
12 bits
Max. Sampling Rate
Multi-channel, single gain: 1 MS/s
Multi-channel, multi gain: 600 kS/s
Multi-channel, multi gain, unipolar/bipolar: 400 kS/s
FIFO Size
1,024 samples
Note: The sampling rate for each channels will be affected by used channel number. For example, if 4 channels are used, the sampling rate is 600k/4 = 125 kS/s per channel. (multi gain, without unipolar/bipolar mixed)
Overvoltage Protection
30 Vp-p
Input Impedance
100 M W /10 pF (Off), 100 M W /100 pF (On)
Sampling Modes
Software, onboard programmable pacer and external
Trigger Modes
Pre-trigger, post-trigger, delay-trigger and about- trigger
Input Range (V, software programmable) & Absolute Accuracy
Unipolar | N/A | 0 ~ 10 | 0 ~ 5 | 0 ~ 2.5 | 0 ~ 1.25 |
Bipolar | ±10 | ±5 | ±2.5 | ±1.25 | ±0.625 |
Absolute Accuracy (% of FSR)* | 0.1 | 0.1 | 0.2 | 0.2 | 0.4 |
* ±1 LSB is added as the derivative for absolute accuracy
Analog Output (PCI-1712 only)
Channels
2
Resolution
12 bits
Output Rate
1 MS/s max.
FIFO Size
32,768 samples
Output Range(Software programmable)
Internal Reference | Bipolar Unipolar | ±5 V, ±10 V 0 ~ 5 V, 0 ~ 10 V |
External Reference | 0 ~ +x V @ +x V (-10 ≤ x ≤ 10) -x ~ +x V @ +x V (-10 ≤ x ≤ 10) |
Slew Rate
20 V/μs
Driving Capability
10 mA
Output Impedance
0.1 W max.
Operation Mode
Static update, waveform generation
Accuracy
INLE: ±1 LSB
DNLE: ±1 LSB
Digital I/O
Channels
16
Compatibility
5 V/TTL
Input Voltage
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Output Voltage
Logic 0: 0.8 V max.
Logic 1: 2.0 V min
Output Capability
Sink: 8.0 mA @ 0.8 V
Source: 0.4 mA @ 2.0 V
Pacer/Counter
Channels
3
Resolution
16 bits
Compatibility
5 V/TTL
Max. Input Frequency
10 MHz
Reference Clock
Internal: 10 MHz, 1 MHz, 100 kHz, 10 kHz
External Frequency: 10 MHz max.
General
Bus Type
PCI V 2.2
I/O Connector
1 x 68-pin SCSI female connector
Dimensions (L x H)
175 x 100 mm (6.9" x 3.9")
Power Consumption
Typical: 5 V @ 850 mA, 12 V @ 600 mA
Max.: 5 V @ 1.0 A, 12 V @ 700 mA
Operating Temperature
0 ~ 60°C (32 ~ 140°F)
Storage Temperature
-20 ~ 85°C (-4 ~ 185°F)
Storage Humidity
5 ~ 95% RH non-condensing
Ordering Information
PCI-1712
- 1 MS/s, 12-bit High-speed Multifunction PCI Card
PCI-1712L
- 1 MS/s, 12-bit High-speed Multi. PCI Card w/o AO
Kunden, die diesen Artikel gesehen haben, sahen auch