Advantech APAX-5080
4/8-ch High Speed Counter Module
- Supports multiple operating modes: (1) Up mode (2) Up/Down mode (3) Pulse/Direction mode (4) A/B Phase mode (5) Frequency mode
- 4 or 8 counter channels depends on operating modes
- 32-bit counter range with 1 bit overflow/underflow
- 1 MHz counter frequency
- 4 digital input channels with counter gate functionality
- 4 digital output channels with counter alarm output functionality
- Over voltage, short circuit and thermal protection design
- 2500 VDC isolation protection (between channels and backplane)
Advantech’s APAX-5080 Counter Module features up to eight channels and hot-swappable functionality. With its 4/8 counter channels, the APAX-5080 is capable of simultaneously taking counts from multiple sources using any of its five operating modes ( UP, UP/Down, Frequency, Pulse/Direction, and A/B Phase modes), therefore saving hardware installation costs and having greater scalability. The flexibility of the APAX-5080 is enhanced with the additional benefit of four DI counter gates to define when a counter is enabled, and four DO alarm output channels triggered by a specific counter value; so that the APAX-5080 can be configured to send an alarm message when certain criteria are met.
General
Dimensions (W x H x D)
30 x 139 x 100 mm
Weight
170 g
Power Consumption
2.5 W @ 24 VDC (typical)
Status Display
LED per channel (for DI/O only)
On: Logic level 1; Off: Logic level 0
Counter/Frequency Input
Channels & Mode
8 (Up Counter, High/Low Freq. and Wave Width mode)
4 (Pulse and Direction, Up/Down Pulse, A/B Phase)
Counting Range
32-bit + 1-bit overflow
Minimum Pulse Width
1 μs for High Freq. mode; 1 ms for Low Freq. mode
Counter Frequency
0.1 Hz ~ 10 Hz for Low Freq. mode and Wave Width mode
10 Hz ~ 1M Hz for High Freq. mode and other modes
Input Voltage
For "0" signal: 0 ~ 3 VDC; For "1" signal: 10 ~ 30 VDC
Accuracy
0.1% for Low Freq. mode
Input Filter
0.1 us ~ 40 ms
Digital Input
Channels
4
Type
Sink (Wet contact)
Input Voltage
For "0" signal: 0 ~ 3 VDC; For "1" signal: 10 ~ 30 VDC
Digital Output
Channels
4 (Sink Type)
Output Voltage Range
8 ~ 35 VDC
Normal Output Current
0.5 A (per channel)
Protection
Isolation Between Channels and Backplane
2,500 VDC
Short Circuit Protection (For DO channel)
Thermal Shutdown Protection (For DO channel)
Environment
Operating Temperature
-10 ~ 60°C (when mounted vertically)
Storage Temperature
-40 ~ 70°C
Relative Humidity
5 ~ 95% (non condensing)
Ordering Information
APAX-5080
Dimensions (W x H x D)
30 x 139 x 100 mm
Weight
170 g
Power Consumption
2.5 W @ 24 VDC (typical)
Status Display
LED per channel (for DI/O only)
On: Logic level 1; Off: Logic level 0
Counter/Frequency Input
Channels & Mode
8 (Up Counter, High/Low Freq. and Wave Width mode)
4 (Pulse and Direction, Up/Down Pulse, A/B Phase)
Counting Range
32-bit + 1-bit overflow
Minimum Pulse Width
1 μs for High Freq. mode; 1 ms for Low Freq. mode
Counter Frequency
0.1 Hz ~ 10 Hz for Low Freq. mode and Wave Width mode
10 Hz ~ 1M Hz for High Freq. mode and other modes
Input Voltage
For "0" signal: 0 ~ 3 VDC; For "1" signal: 10 ~ 30 VDC
Accuracy
0.1% for Low Freq. mode
Input Filter
0.1 us ~ 40 ms
Digital Input
Channels
4
Type
Sink (Wet contact)
Input Voltage
For "0" signal: 0 ~ 3 VDC; For "1" signal: 10 ~ 30 VDC
Digital Output
Channels
4 (Sink Type)
Output Voltage Range
8 ~ 35 VDC
Normal Output Current
0.5 A (per channel)
Protection
Isolation Between Channels and Backplane
2,500 VDC
Short Circuit Protection (For DO channel)
Thermal Shutdown Protection (For DO channel)
Environment
Operating Temperature
-10 ~ 60°C (when mounted vertically)
Storage Temperature
-40 ~ 70°C
Relative Humidity
5 ~ 95% (non condensing)
Ordering Information
APAX-5080
- 4/8-ch High Speed Counter Module
Kunden, die diesen Artikel gesehen haben, sahen auch