Barix Annuncicom 100
Intercom / Paging device with contact closure inputs and relay output, 2W amplifier
- MP3, G.711, G.722*, PCM Encoding and Decoding
- Shoutcast/Icecast Source capability
- Audio Level Supervision with SNMP Trap generation
- IP Streaming via TCP, UDP, RTP, Multicast
- Microphone Input
- Line Level Input / Output
- Amplified Output 2W (8Ohm)
- Relay Output (1)
- Contact Closure Input (2)
- RS-232 Serial Port (1)
- RS-485 Serial Port (1)
- Supply Voltage (9-30VDC or 12 -24VAC)
The Annuncicom 100 is a versatile Audio over IP device designed to serve as a gateway between IP Paging, VoIP and Intercom systems and traditional microphone/speakers or amplifers. Supporting both music (MP3) as well as voice codecs (G.711, uLaw, aLaw) and a large number of protocols (including shoutcast, SIP etc), the device can be used for both background music as well as VoIP applications.
Designed in Switzerland and being used in thousands of mission critical paging and intercom applications, the Barix Annuncicom series is the product of choice for IP based Paging, Intercom and VoIP applications worldwide.
Designed in Switzerland and being used in thousands of mission critical paging and intercom applications, the Barix Annuncicom series is the product of choice for IP based Paging, Intercom and VoIP applications worldwide.
Applications
- VHF Radio Controller and interface to IP
- Microphone Encoder for IP Audio Surveillance
- Door Intercom Controller, VoIP based
- Help Point/SOS call box device
- Classroom VoIP device with built-in amplifier, talkback, serial port
- Paging and Audio Distribution with Amplifier control and monitoring
- Live IP Audio Encoder for Streaming Applications
- Generic, bidirectional full-duplex VoIP module for Paging and Intercom applications
- Digital Annunciator, Message Player, Message Repeater
- SIP and IP Paging Zone Device
Further documentation and software at Barix
SIP RAVA Application
SIP RAVA application has been developed to allow Barix Annuncicom 200 device to operate with Crestron RAVA PTT Touch Panels for door intercom applications.
While the device is operated in full duplex mode, it is recommended to use the Crestron RAVA panels in Halfduplex Push-to-talk to avoid feedback.
The Fimware is provided as binary image to be loaded direct onto the device using the usual WEB update function.
Technical Specifications
- Electrical
- 9 to 30 VDC, 12 to 24 VAC, 8 Watt max. on screw terminal block and 2.1mm barrel connector
- 10/100Mbps auto,
- RJ-45 connector with integrated Link/Activity LED
- Protocols: TCP/IP, UDP, RTP, SIP, DHCP,Multicast capable
- On detachable screw terminal block and 3.5 mm (1/8") Jack
- 3 pin TRS, with bias power 2.7VDC
- Line level input, 2k Ohm input impedance on RCA 2.2 VPP max, adjustable in sensitivity
- Frequency response 20 Hz .. 20 kHz (-3dB)*
- Dynamic range 87 dB, SNR -87 dB, THD <0.01% (-3dBFS)*
- On 9-pin Sub-D connector
- 300..230´400 Baud asynchronous, tunneling or local control
- calculation 560 000h (according to MIL217F at 25°C)
- Aluminum case, 390 g
- Dimensions 108 x 38 x 125 mm (4.25 x 1.5 x 4.92 inch)
- rack and wall mountable using accessories
- Line level output, 40..60 Ohm output impedance on RCA
- Output level software controllable
- Full scale output voltage: 3 dBu, 3 VPP
- Frequency response 20 Hz .. 20 kHz (-3dB)*
- Dynamic range 94 dB, SNR -94 dB, THD <0.03 % (-3dBFS)*
- On detachable screw terminal block
- Suggested speaker impedance 4 to 32 Ohm
- 1 Watt max @ 8 Ohm (2 W max @ 4 Ohm)
- Frequency response 20 Hz .. 20 kHz (-3dB)*,
- Dynamic range 80dB, SNR -80dB, THD <0.15% (-3dBFS)*
- MP3, encoding/decoding up to 192/320 kbps
- PCM 16 bit and 8 bit (uLaw, aLaw) @ 8..48 kHz
- MP3, VBR, CBR* / VBR, CBR* encoding/decoding
- PCM, G.711, G.722* encoding/decoding
- Model 50 (48 VDC) , PoE, 5 Watt
- Model 100 (9..30 VDC 12..24 VAC) USB 2 Watt
- Model 155 (24..48 VDC) 5.5 Watt
- Model 200 (16..30 VDC, 48 VDC, 16..24 VAC) PoE, USB, Aipohne 8 Watt
- Model 1000 (24..48 VDC)
- On detachable screw terminal block
- 1 relay output with normally closed and open contacts,
- 30V 0.5A (AC & DC)
- 2 discrete / dry contact inputs
Ethernet
Microphone Input
Analog Line Input (mono)
* depends on used codec, best results @48kHz PCM
RS-232 and RS-485 Interfaces
MTBF
Mechanical
Analog Line Output (mono)
Speaker out
Audio formats
Model comparison
Discrete I/O
* Hardware revision 2 only
Environmental
- Operating Environment
- 0 to +50°C / 32 to 122°F
Max rated temperature range -20 to +60°C / -4 to 140°F
Storage Conditions
- -40 to +85°C /-40 to 185°F
all ranges at 0 - 70% relative humidity, non-condensing
Certifications/compliant with
- RoHS, FCC, CE, C-Tic
Customers who viewed this item also viewed